Biocare IM12 Patient Monitor Parameter Panel Components 02044025 E204460
|
|
Biocare IM12 Patient Monitor Parameter Panel Components 02044025 E204460 Medical Equipment Control Module
Overall Introduction
This parameter panel assembly is a rounded rectangle made of light gray medical-grade plastic with a matte finish, capable of withstanding frequent cleaning and minor bumps in a clinical environment. The top of the panel has two circular recesses with orange outlines for accommodating extended function modules of the device. The main area features a partitioned layout: on the left, from top to bottom, are a blue SpO₂ oxygen port and two yellow T1/T2 dual temperature ports; on the right are a green ECG port and a silver NIBP non-invasive blood pressure port. Each port has clear function labels and color codes, along with different pin and snap-fit designs to prevent incorrect insertion during clinical operation. The panel edges also feature snap-fit and screw holes for a perfect fit with the Biocare IM12 monitor.
Parameter Interfaces
IBP1, IBP2—invasive blood pressure interface. T1, T2—body temperature probe interface. NIBP— non-invasive blood pressure interface. SpO2— blood oxygen saturation probe interface. ECG— electrocardiograph lead interface.
•SpO2 Monitoring
•IBP Monitoring
•Temperature Monitoring
•ECG Monitoring
Disassembly steps 1. Remove the four M3*8 screws from the back cover by unscrewing
them completely. 2. Separate the front and back covers, then disconnect the
connecting cables for the screen and button board. 3. Disassembling the SpO2 module: Refer to the figures below.
First, unscrew the relevant screws, then disconnect the cable, and
finally remove the SpO2 module. 4. Disassembling the sensor cable: As shown in the figure below,
unscrew the two M2.5*6 screws—this will allow you to remove the
SpO2 sensor cable. Precautions
Proper Plug-in/Unplugging Procedure: When connecting the leads, align them with the interface pins, gently insert, and secure the clips. When unplugging, hold the plug body; do not pull the wires directly to avoid deforming the interface pins or breaking the wires.
|
||||||||||||||||||||||||||||
| Product Tags: Biocare IM12 patient monitor panel patient monitor parameter components Biocare monitor parts with warranty |
|
Mindray Patient Monitor Battery LI13I001A Suit For Ipm5 Ipm8 Ipm10 Ipm12 IMEC5 IMEC8 IMEC10 IMEC12 New |
|
051-000943-00 Patient Monitor Spo2 Board Mindray T1 IPM12 IPM10 IPM8 Imec8 Imec10 Imec12 |
|
Patient Monitor Printer Recorder TR60-F Mindray IMEC7 IMEC8 IMEC10 IMEC12 IPM8 IPM9 IPM10 IPM12 MEC T5 T6 T8 Series |
|
PHiliph MX400 MX450 MX Series Patient Monitor AC/DC IV2-FLEX ASSY-PWR AC / DC Power Supply 453564281221 |
|
P/N 453564271711 PHiliph MX400 Mx450 MX Series Patient Monitor Mainboard |
|
MX450 Patient Monitor Battery Board Power Supply Hospital Equipment |