Mindray UMEC12 Patient Monitor Mainboard

050-002003-01 051-002497-00 Used good condition

►Quick Detail:

This product is Mindray UMEC12 Patient Monitor Mainboard 050-003003-01 051-002497-00 Used good condition
There is a small button battery on top of each motherboard battery,
The model is CR2032. It is mainly responsible for powering the BIOS chip, saving system time, and some basic settings. After you shut down, the motherboard battery acts like a diligent butler, silently protecting this information.
But many people have a misconception that if the motherboard battery runs out and there is a problem with the motherboard, it will lead to problems with the monitor device? The answer is not necessarily.
The manifestation of the motherboard running out of battery is that the BIOS settings are always reset to the default startup prompt "CMOS checksum error" every time the computer is turned on. Occasionally, there may be situations where the startup time is particularly long. In 95% of cases, replacing the motherboard battery can solve the problem. So when asking the repair engineer to confirm the motherboard issue, first check if the button battery on the motherboard is dead. If the battery runs out, replace it promptly.

►The replacement steps are super simple:

Shut down, unplug the power and find the button battery on the motherboard. Gently push open the fixed buckle and replace it with a new battery. Pay attention to the positive and negative poles when replacing the battery. When choosing batteries, please also choose regular brand batteries, otherwise it is easy to cause leakage and damage to the motherboard; If the battery on the motherboard has been replaced and the problem persists, you can try other methods such as clearing the CMOS, finding the Clear CMOS jumper on the motherboard, and short circuiting it with a jumper cap for 3-5 seconds. Remember to restore the jumper position. Alternatively, check if the voltage on the motherboard is normal. If the voltage is below 2.5V, it indicates that there is a problem with the motherboard and a professional repair engineer needs to be consulted to disassemble and inspect it.

►Key features:

► Company situation:

The company has been professionally operating various brands of original medical monitoring instruments since 2015. The company has many professional senior engineers and has sufficient ability to undertake various medical equipment maintenance work. Covering motherboards, sensors, probes, modules, connectors, shells, etc. for various medical monitoring equipment.

►About delivery:

We default to express delivery by DHL,Fedex, We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.