Comen C26 Fetal Monitor Bottom Cover 043-000698

►Quick Detail:

Brand : Comen
Model name C26 Fetal Monitor
Connectivity technology Wireless
Special features Bottom shell of fetal monitor
Size: 30*35*40cm
Material: ABS
Applicable to: C26 Fetal Monitor

Upon careful observation of this bottom cover, you will notice that there are many grooves and nodes inside. During the design, manufacturing, and modeling process, the bottom shell needs to be fully integrated with the top cover, and each checkpoint needs to be perfectly fitted;

►How to install the bottom shell:

When you confirm ordering the product and receive Comen C26 Fetal Monitor Bottom Cover 043-000698, prepare the machine, screwdriver, and other installation tools in advance

1. Fixed bottom shell

Firstly, pick up the bottom shell and place it in the position where it needs to be installed. Then, use a screwdriver to install and fix it at the corresponding point, so that the bottom shell is fixed.

2. Thread the line interface through the small hole at the top of the device (one side of the interface has a flat surface facing to the right, corresponding to the flat surface of the small hole at the top right of the device). At the same time, first take out the gasket from our accessory package and insert it into the wire connector, then take out the small screw with a notch and insert it into the connector, then take out the nut and tighten it, and finally take out the antenna and rotate it to tighten it. This is the installation.

3. Fixed panel
Thread the power cord interface through the small hole at the bottom and insert it into the network cable interface on the motherboard. Cover the front shell of the device with the bottom shell, tighten the screws at the four corners of the device, and the device is assembled. After installation, carefully observe whether the various surfaces and four points of the equipment are perfectly fitted together.

►Key features:

► Company situation:

The company has been professionally operating various brands of original medical monitoring instruments since 2015. The company has many professional senior engineers and has sufficient ability to undertake various medical equipment maintenance work. Covering motherboards, sensors, probes, modules, connectors, shells, etc. for various medical monitoring equipment.

►About delivery:

We default to express delivery by DHL,Fedex, We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.