PHiliph MX400 Patient Monitor Battery Charge Board 453564271771

PHiliphh MX400 Patient Monitor Battery Charge Board 453564271771

PHiliphh MX400 patient monitor battery charge board 453564271771 Brief Introduction 

The PHiliphh MX400 patient monitor battery charge board part number is 453564271771. This board is responsible for charging the battery in the patient monitor, ensuring that it stays operational for extended periods of time. If you are experiencing issues with the battery charging on your PHiliphh MX400 patient monitor, it is recommended to replace the battery charge board to restore proper functionality. Please consult with a medical equipment technician for assistance with replacing the board.

Specification of PHiliphh MX400 patient monitor battery charge board 453564271771

Battery storage

When storing batteries, make sure their terminals do not come into contact with metal objects or other conductive materials. If batteries are stored for an extended period of time, they should be stored in a cool place, ideally at 15°C (60°F), with a state of charge between 20% and 40%. Storing batteries in a cool place slows down the aging process.

Batteries should not be stored at temperatures outside the range of -20°C (-4°F) to 60°C (140°F). Do not store batteries in direct sunlight. Stored batteries should be partially charged to between 20% and 40% of their capacity every 6 months. They must be fully charged before use.

NOTE

Storing batteries above 38°C (100°F) for extended periods can significantly reduce their lifespan.

Battery life management

The lifespan of a lithium-ion battery depends on the frequency and duration of use. With proper maintenance, the lifespan is approximately 3 years or 500 charge-discharge cycles, whichever comes first. Additionally, experience indicates that the incidence of failures may increase with battery life due to the stress accumulated during daily use. Therefore, we strongly recommend replacing lithium-ion batteries after 3 years or 500 charge and discharge cycles. The age of a lithium-ion battery starts from the date of manufacture. To view the manufacturing date and number of charge and discharge cycles, select the battery symbol on the patient monitor screen. The date of manufacture and the number of charge and discharge cycles are displayed on the screen along with other battery data.

Thank you so much for your attention .If you're interested in PHiliphh MX400 Patient Monitor Battery Charge Board 453564271771 ,feel free to contact us .Thank you .