Mindray PM8000 Patient Monitor parts Rear Casing With Handle Side Cover

Mindray PM8000 Patient Monitor Rear Casing with Handle & Side cover

Mindray PM8000 Patient Monitor Rear Casing with Handle & Side cover brief introduction

The rear casing of the Mindray PM8000 patient monitor is designed to provide protection and support for the internal components of the monitor.

It is made of durable plastic material that can withstand the rigors of daily use in a medical setting.

The rear casing comes with a built-in handle, which allows for easy transport and maneuverability of the monitor. This is particularly useful for

healthcare professionals who need to move the patient monitor from room to room or from one patient's bedside to another.

Mindray PM8000 Patient Monitor Rear Casing with Handle & Side cover Specification

Mindray PM8000 Patient Monitor Rear Casing with Handle & Side cover material

The Mindray PM8000 patient monitor’s rear cover case with handle and side covers are made of high-quality materials. It is strong, durable and

designed to withstand the rigors of clinical use. The case is well constructed and provides protection to the monitor’s internal components.

About Rear cover panel 

On the rear panel are the following sockets

■ Power Supply: 100 ~ 240 (VAC), 50/60 (Hz). (Socket ⑤

■ VGA MONITOR: (Socket ③)

Appliance:

 1) The VGA monitor is installed in the same room as the patient, but the distance from the patient should be more than 1.5 meters. This monitor

is designed to be used as a secondary monitoring device.

2) Plug and unplug the cable when the VGA monitor is turned off.

3) Turn on the PM-8000 patient monitor at the same time or after VGA. 4) Adjust brightness and contrast appropriately.

■ (Socket ④)

■ AUX OUTPUT (socket ②)

This port is used for both Analog Output and NURSE CALL.

The user could select the function of this port in “NURSE CALL SETUP” menu of “USER MAINTAIN” menu. Refer to the section about “USER

MAINTAIN” menu to know the detailed information.

■ Network Interfaces (Socket ①): Standard RJ45 Socket.

■ Fixing hole of supporter(Socket ⑥).

Thank you so much for your attention .If you're interested in Mindray PM8000 Patient Monitor Rear Casing With Handle & Side Cover ,feel free to contact us .Thank you .