Edan IM50 Patient Monitor Display Screen HannStar HSD084ISN1

Hospital Medical Equipment Edan IM50 patient monitor display Screen HannStar HSD084ISN1 in good working condition

Edan IM50 patient monitor display Screen HannStar HSD084ISN1

► Brief Introduction

HannStar Display model HSD084ISN1-A01 is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 8.4 (4:3) inch diagonally measured active display area with SVGA (800 horizontal by 600 vertical pixel) resolution.

Operation

1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.

2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly.

3 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.

4 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading.

5 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent.

► General Precaution

Electric Shock

1. Disconnect power supply before handling LCD module.

2. Do not pull or fold the LED cable.

3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector or cables in order to prevent electric shock.

Absolute Maximum Ratings and Power Protection Circuit

1. Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.

2. Please do not leave LCD module in the environment of high humidity and high temperature for a long time.

3. It’s recommended to employ protection circuit for power supply.

► Features

• 8.4 (4:3 diagonal) inch configuration
• 6 bits R/G/B + 2 bits FRC driver with 1channel TTL interface
• RoHS and Halogen-Free Compliance

► Measuring Condition

• Measuring surrounding : dark room
• LED current IL : 180mA
• Ambient temperature : 25±2oC
• 15min. warm-up time

► Specification

► Company Profile

We cater to all biomedical facility needs - service, repair, rental, and purchase and sale of equipment. Safe, reliable and compliant medical device services are our primary goals. We pride ourselves on the individualized attention we provide each client, catering to all aspects of their biomedical facility. Our team of experienced biomedical technicians are trained, certified and equipped with the latest technology and tools to repair and maintain a wide variety of patient care and diagnostic equipment.

Our technicians ensure that all equipment leaving our warehouse is meticulously tested and certified for safety and compliance. We understand the importance of device safety and performance in today's healthcare environment. Providing the most professional customer service and adhering to the highest quality standards is our mission.

Please kindly contact us, if you are interested in Edan IM50 patient monitor display HannStar HSD084ISN1. 

Thank you!