ICU Patient Monitor Parts Mindray PM7000 PM-7000 Back Cover Case

Mindray PM7000 PM-7000 Patient Monitor Back Cover Case

► Brief Introduction

This Mindray PM7000 PM-7000 Patient Monitor integrates the functions of parameter measurement, waveform monitoring, freezing, and recording, etc. Its color TFT liquid crystal display is able to show patient parameters and waveforms clearly. The monitor also features compact size, lightweight, easy-to-carry handle and built-in battery, which make it portable, especially in hospital transport. The compact control panel and control knob, and the easy-to-use menu system enable you to freeze, record, or perform other operations conveniently. Besides, this monitor can be connected with the central monitoring system whereby a monitoring network will be formed.

► Cleaning

1. The PM-7000 Patient Monitor must be kept dust-free.

2. It is recommended to regularly cleaning the monitor shell and the screen. Use only non-caustic detergents such as soap and water.

• Avoid using ammonia-based cleaners.
• Most cleaning agents must be diluted before use.
• Don't use the grinding material, such as steel wool etc.
• Don't let the cleaning agent enter into the chassis of the system. Do not emerge any part of the device into any liquid.
• Don't leave the cleaning agents on any part of the device surface.
• Except for those cleaning agents listed in “NOTE” part, following disinfectants can be used on the instrument:

Diluted Ammonia Water

Diluted Sodium Hyoichlo (Bleaching agent)

► Specification

► Introduction

1. External socket of DC input - Standard interface of DC input. Internal positive and external negative.

2. Analog Output Connector - Connector for oscillograph and pen recorder.

3. VGA MONITOR -

Monitor interface for external standard VGA color monitor.

Please pay attention to the following instructions when installing the VGA monitor:

1) The VGA monitor should be installed 1.5 meters from the patient. It is intended as an assistant monitoring device.

2) Plug the cable in corresponding socket before VGA monitor is electrified.

3) Power on at the same time, or power on the monitor after VGA.

4) Adjust brightness and contrast properly.

4. Network Interfaces - Standard RJ45 Socket, it can also connect with a wireless card.

5. AG Module Interfaces

6. AC Power Input Connector: 100 ~ 240 (VAC), 50/60 (Hz).

7. Equipotential grounding terminal for connection with the hospital’s grounding system.

8. Wireless Card - Connect with Network Interfaces to realize the connection between the monitor and central monitoring system.

Please kindly contact us, if you are interested in Mindray PM7000 PM-7000 Patient Monitor Back Cover Case, Thank you!