The portable anti-static wrist strap tester is the ideal tester for the manufacturing environment, mainly measuring the contact resistance between the wrist strap and skin Anti-static wrist straps can fail to perform their intended function. Ground cords get stressed from prolonged use and can break open inside the insulation. You can't see if your anti-static wrist strap is performing properly, but you can and should test it regularly. Electronics professionals should test their wrist straps for proper function at least once per day at the beginning of their work shift. Depending on the quality standards at your company, more frequent testing may be necessary. This portable anti-static wrist strap tester is great for instant on the spot testing of anti-static straps as part of your quality control program.

ESD Wrist Strap Tester Features:

-- No checking is required
-- Instant warning of wrist strap failure, improve production quality
-- Highly reliable, easy and convenient
-- Small and handy, easy and convenient
-- Low price, save cost
-- For your convenience, you can use any wrist strap with banana plug in the market.

ESD Wrist Strap Tester Spefication:

ESD Wrist Strap Tester Operation:

1. Install the anti-static wrist strap monitor under the console.
2. Wear the anti-static wrist strap so that the metal piece is close to the skin, and insert the plug of the electrostatic bracelet into the INput hole.
3. One end of the ground wire is connected to the earth, and the crocodile is connected to the ground wire.
4. Plug one end of the power adapter into the power input connector, the other end into the AC220V power supply, and press the power switch.

Operation guide:
1. Normal state: green light is on.
1 electrostatic wrist strap and hand contact is good, electrostatic wrist strap and grounding wire are well connected, the human body's electrostatic discharge is smooth.
2 work well, real-time monitoring of the electrostatic wrist strap.

2. Alarm status: alarm sound and red light are on, should promptly check and deal with possible faults.
1 The wrist strap is detached, and the wrist strap can be worn.
2 The wrist strap and the hand contact are loose, and the wrist strap needs to be close to the human skin.
3 dry skin, anti-static oil on the skin.
4 Wrist strap is damaged, replace the OK wrist strap.
5 Connect the ground wire to fall off and connect the ground wire.
6 earth wire is poorly discharged, check the grounding system.

Note: After about 50,000 cycles of operation, when the green "GOOD" LED will light up, but did not issue a sound, Replace the battery.