Optical Device Test 100G Error Meter Test Platform Signal Source
summarize
U9264A is a 100G product error tester. It can be used in the
development and production testing of optical devices, high-speed
cables, optical modules and communication systems. It supports
multiple rates from 9.953Gbps to 14.5Gbps and from 25 to 29Gbps.
Apply
● apply to all kinds of light module (QSFP28 CFP2, CFP4, SFP28, SFP
+, QSFP +, CFP) and the error testing subsystem
● Applicable to the bit error test of active and passive cables and
active optical fibers
● can be used as the signal source of 10G and 100G test platform
peculiarity
● supports multiple rates from 9.953Gbps to 14.5Gbps and from 25 to
29Gbps;
● integrates four programmable code generators and four error
detectors;
● Internal integrated clock module;
● Error detector integrated clock recovery unit;
100G error meter is mainly used to test signal integrity of digital
communication systems linked to independent bit error rate (BER).
It can intuitively display the receiving ability of the tested
part, and has the functions of transmission system bit rate,
transmission system characteristics, rate, code graphic
transmission system alarm and so on.
Specification parameter
| Parameter | Min | Type | Max | Unit |
|
| General parameters |
| Supply voltage | 100 | 220 | 240 | V | AC, 50-60HZ |
| Power consumption | 20 | W |
|
| Operating temperature range | 0 |
| 55 | ℃ |
|
| Dimensions | 235 x 55 x 320 | mm |
|
| BERT(ED) |
| Input level range | 100 | — | 1200 | mVppd | differential input, AC coupled |
| Input Rate Range | 9.953 | — | 29 | Gbps |
|
| 100 | ohm | differential |
| Connector type | SMA |
| differential, front panel |
| Supported pattern | PRBS 2n-1, n=7, 9, 10, 11, 15,23, 31, Up to 20 bits/Ch, user
defined | RATE 9.953~14.5Gbps |
| PRBS 2n-1, n=9, 15, 31 | RATE 25~29Gbps |
| Programmable Pattern Generator (PPG) |
| Output level range | 200 | — | 1100 | mVppd | differential input, AC coupled |
| Output rate range | 9.953 | — | 29 | Gbps | 9.953~14.5 / 25~29Gbps |
| Output Impedance | 100 | Ohm | differential |
