Motorcycle Paddock Stand Front Wheel Engine Rear Rotate Steel Tube Material

 motorcycle stand front and rear wheels engine

Description:

  The motorcycle stand can ensure that the rear wheel of the motorcycle is in the middle of the frame, and then rotate the stand. Hold the adapter, turn the knob to adjust the length, and then tighten the screw. Use the circle handle to lift the bracket so that the bracket is under the rocker arm, and finally press the circular handle to lift the motorcycle slowly. It is a good helper for motorcycles that you can repair at home, a must-have choice for families with motorcycles.

Specification:

QA:

How do you tie the belt?

Answer:Pass the non-loop end of the strap through a slot on the top edge of the cart. Then pass the non-loop end of the strap through the loop end and tighten it. Then connect one end of the strap to the cart. Put the snowmobile skis on the trolley. Put the strap on the ski and pass it through another slot on the top edge of the trolley. Pull tight and return to the top of the ski, then push the Velcro pieces together.
Whats the best way to get your sled on this?

Each front ski one at a time first. If you pull upward on front of ski you can slide them into place. Next place rear dooly next to track at spot you want track to set upon it. Lift back straight up high enough to clear rear dolly and move rear of sleds over dolly and lower into place. Fairly simple to do.

Service:

If you have any questions about the products you have purchased, you can consult our customer service. If you have any questions, you are welcome to contact us online, email, or phone!