101 - 110 of 661
threaded t38 drill bit
Selling leads
|
... 90mm to 105mm 4'' DTH Hammer bits DHD340, QL40, MISSION40, SD4 shank 110mm to 130mm 5'' DTH Hammer bits DHD350, QL50, MISSION50, ...
2025-07-25 00:18:28
|
|
4 Inch DHD350 DTH Hammer Mining Drill Bits Diameter 102mm DTH Drill Bit Product Information: Matching for DTH hammer. DTH hammer is a part of down ...
2025-06-21 00:38:37
|
|
...Drilling Dth Hammer Drill Bit Product Information: Our DTH hammer and bits are compatible with CIR, DHD, QL,SD,Mission, etc. series of Atlas and ...
2025-06-21 00:38:30
|
|
Diameter 203mm Blue Color Mining Drill Bits DTH Drill Bit DTH Hammerit Product Information: • Matching for DTH hammer. • DTH hammer is a part of down ...
2025-06-21 00:38:30
|
|
...Drilling Down The Hole DTH Hammer DTH Drill Bit Product Information: Our DTH hammer and bits are compatible with CIR, DHD, QL,SD,Mission, etc. ...
2025-07-25 00:18:28
|
|
42mm Button Drill Bit For Mining Rock Drilling Bits Description: We manufactuer various tapered button bits in different degrees as below: Bit ...
2025-06-21 00:33:13
|
|
... holes quantity, button shape and face shape. Our button bit is made by high quality tungsten carbides and steel, through heat treatment so that it ...
2025-06-21 00:33:19
|
|
... and abrasive rock formation, a wide taper angles is nomally used. Taper angles of 11° and 12° are normally used on modern drill rigs. For low ...
2025-06-21 00:33:13
|
|
...Drill Bit for hard Rock Product Information: DTH bit is the tool cutting rocks, and subject to severe stress from the striking piston as well as ...
2025-06-21 00:38:35
|
|
... penetration rates and high productivity. There are mainly four types of end face design forms used by down-the-hole drill bits: namely, end face ...
2025-07-25 00:18:29
|