Fluke 726 Precision Multifunction Process Calibrator Fluke
Fluke 726 Precision Multifunction Process Calibrator
* More precise measurement and calibration source performance,
accuracies of 0.01%.
* Two separate channels; measure, source and view process signals
simultaneously
* Measure volts, mA, RTDs, thermocouples, frequency, and resistance
to test sensors and transmitters
* Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms,
and pressure to calibrate transmitters
* Measure/source pressure using any of 29 Fluke 700Pxx Pressure
Modules
* Source mA with simultaneous pressure measurement to conduct valve
and I/P tests
* Integrated pressure switch test allows you to capture the set,
reset and deadband of a switch
* Memory storage for up to 8 calibration results, return Features
* More precise measurement and calibration source performance,
accuracies of 0.01%
* Transmitter error% calculation, interpret calibration results
without a calculator
* Memory storage for up to eight calibration results, return stored
calibration data from the field for later analysis
* Frequency totalizer and frequency pulse train source mode for
enhanced flowmeter testing
* HART mode inserts 250 Ω resistor in mA measure and source for
compatibility with HART instrumentation
* Integrated pressure switch test allows you to capture the set,
reset, and deadband of a switch
* Custom RTD curves, add calibration constants for certified RTD
probes for enhanced temperature measurement
* Voltage input protection design for improved reliability
* Two separate channels; measure, source and view process signals
simultaneously
* Measure volts, mA, RTDs, thermocouples, frequency, and resistance
to test sensors and transmitters
* Source/simulate volts, mA, thermocouples, RTDs, frequency, and
pressure to calibrate transmitters
* Measure or source pressure using any of 29 Fluke 700Pxx pressure
modules (pressure pump required)
* Source mA with simultaneous pressure measurement to conduct valve
and I/P tests
* Perform fast linearity tests with auto-step and auto-ramp
features
* Power transmitters during test using 24 V loop supply and
simultaneous mA measurement
* Store frequently-used test setups for later use FLUKE 726 - Precision Multifunction Process Calibrator * More precise measurement and calibration source performance,
accuracies of 0.01%.
* Two separate channels; measure, source and view process signals
simultaneously
* Measure volts, mA, RTDs, thermocouples, frequency, and resistance
to test sensors and transmitters
* Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms,
and pressure to calibrate transmitters
* Measure/source pressure using any of 29 Fluke 700Pxx Pressure
Modules The Fluke 726 Precision Multifunction Process Calibrator is
designed specifically for the Process industry with broad workload
coverage, calibration power and unsurpassed accuracy in mind. The
726 measures and sources almost all process parameters and can
calibrate almost anything. The 726 will also interpret results
without the help of a calculator and store measurement data for
later analysis. The Fluke 726 Multifunction Process Calibrator (referred to as “the
Calibrator”) is a handheld, battery-operated instrument that
measures and sources electrical and physical parameters. See Table
1. What's included with the Fluke 726
* Process Calibrator
* NIST-Traceable Calibration Report and Data
* Test Leads
* Stackable Test Leads
* Alligator Clips
* Quick Reference Guide |
