HCY virus sampling tube disposable virus sampling tube set sampling tube

Disposable Sampling Tube

HCY virus sampling tube disposable virus sampling tube set sampling tube

Virus sampling tube introduction:

The virus Sampling Tube Test Kit is made of medical-grade PP. The unique structural design and manufacturing process can prevent electricity leakage at night. And it has the characteristics of no RNase, no DNase, no endotoxin, high-temperature resistance, high-pressure resistance, high-speed centrifugation, etc.

Disposable virus sampling tubes of different specifications meet different needs. 20 virus sampling tubes can collect and save 20 swab samples. This mixed-sample detection kit is specially used for large-scale screening of asymptomatic coronavirus infections. It is suitable for large-scale detection projects such as schools, factories, units, and urban areas. It has the advantages of efficient screening and resource-saving.

Virus sampling tube features:

The virus sampling tube detection kit is specially designed for large-scale screening of asymptomatic coronavirus infections. It is suitable for large-scale inspection projects such as schools, factories, units, and urban areas. It has the advantages of efficient screening and resource-saving.

Virus sampling tubes are used in:​

Virus sampling tubes are used for the collection, transportation, and storage of virus samples such as influenza, bird flu, and coronavirus. for subsequent extraction and amplification.

Instructions for use of virus sampling tube:

1. Disinfect your hands, check that the swab packaging is intact, and then open it;
2. Sampling swab to sample the target site;
3. Dip the swab head of the sampling swab into the virus preservation solution;
4. Break the sampling swab at the break;
5. Repeat steps ① to ④ for subsequent sampling. After collecting a sufficient amount of swab samples in the sampling tube, tighten the tube cap and shake it several times to complete the sampling.
6. Immediately put the sampling tube into the biosafety bag, seal it, and transport it for inspection.

Precautions for virus sampling tube:

1 After collecting the pathogenic bacteria specimens, the disposable sampling cotton swab should be completely inserted into the preservation solution to retain the pathogenic bacteria to the maximum extent.
2 The collected specimens must be fresh and sent for inspection in time to avoid the death of pathogenic bacteria.
3 It is strictly forbidden to use products with damaged packaging or beyond the shelf life to prevent pollution.

Note: This disposable viral collection tube is intended for in vitro diagnostic purposes and is not intended for internal or external use in humans or animals.

Serious event if swallowed: it irritates eyes and skin. If splashed in the eyes, rinse with water.

Packing specifications of virus sampling tube:

20 pcs/box, 50 pcs/box, 100 pcs/box

Virus sampling tube sample requirements:

Specimens collected in virus sampling tubes should be sent to the laboratory within 48 hours at 2-8°C. If it cannot be transported to the laboratory within 48 hours, it should be stored at -70°C or below. Specimens should be inoculated and separated as soon as possible after they are sent to the laboratory. It can be stored at 2-8°C within 48 hours after inoculation and isolation. If not inoculated and isolated in time, it should be stored at -70°C or below.

Storage conditions and validity period:

1 The product should be stored in a clean, hygienic, dry, and ventilated environment

2 The temperature is 5℃~35℃

3 Relative humidity<85%RH

4 Product shelf life: 12 months