IC Electronic Components Texas Instruments/TI TMUX154ERSWR
| Configuration | 2:1 SPDT |
| Number of channels (#) | 2 |
| Power supply voltage - single (V) | 3.3 |
| Protocols | Analog, UART, I2C, LVDS |
| Ron (Typ) (Ohms) | 6 |
| CON (Typ) (pF) | 7.5 |
| ON-state leakage current (Max) (µA) | 1 |
| Bandwidth (MHz) | 900 |
| Operating temperature range (C) | -40 to 85 |
| Features | 1.8-V compatible control inputs, Powered-off protection, Supports
input voltage beyond supply |
| Input/output continuous current (Max) (mA) | 64 |
| Rating | Catalog |
- VCC Operation at 3 V to 4.3 V
- I/O Pins Can Tolerate up to 5.25 V
- 1.8-V Compatible Control Logic
- Supports Powered-off Protection I/O Pins Hi-Z When VCC = 0 V
- RON = 10 Ω Maximum
- ΔRON = 0.35 Ω Typical
- Cio(ON) = 7.5 pF Typical
- Low Power Consumption (1 uA Maximum)
- –3-dB Bandwidth = 900 MHz Typical
- Latch-Up Performance Exceeds
100 mA Per JESD 78, Class II (1) - ESD Performance Tested Per JESD 22
- 8000-V Human-Body Model
(A114-B, Class II) - 1000-V Charged-Device Model (C101)
- ESD Performance I/O Port to GND (2)
(1)Except EN and SEL Inputs
(2)High-voltage HBM is performed in addition to the standard HBM
testing (A114-B, Class II) and applies to I/O ports tested with
respect to GND only.
The TMUX154E is a high-bandwidth 2:1 switch specially designed for
the switching ofhigh-speed signals in applications with limited
I/Os. The wide bandwidth (900 MHz) of this switchallows signals to
pass with minimum edge and phase distortion. The switch is
bidirectional andoffers little or no attenuation of high-speed
signals. It is designed for low bit-to-bit skew andhigh
channel-to-channel noise isolation.
The TMUX154E integrates ESD protection cells on all pins, is
available in a tiny UQFNpackage (1.8 mm × 1.4 mm) or a VSSOP
package, and is characterized over the free-air temperaturerange of
–40°C to 85°C.
