181 - 190 of 276
plc intermediate wire drawing machine
Selling leads
|
...Wire Pulling Machine Introduction Control mode 1. To realize the speed control of wire drawing and wire take-up, the speed signal must be measured ...
2024-12-09 20:41:25
|
|
Right Direction Fine Wire Drawing Equipment With Low Power Introduction Wire drawing oil stay wire: plastic deformation occurs when the wire blank ...
2024-12-09 20:41:25
|
|
High Speed Medium Fine Multi Drawing Machine For 14 Copper Wires Introduction 1. High precision helical gear transmission, unique oil lubrication ...
2024-12-09 21:21:22
|
|
...wire and cable equipment manufacturer integrating R&D, processing, assembly, commissioning and after-sales. The company is committed to copper wire...
2024-12-09 20:41:25
|
|
... increases, the tensile resistance also increases accordingly, that is, the tensile force consumption is large in the drawing process. Relationship ...
2024-12-09 20:41:25
|
|
... the friction between die hole diameter and wire rod. The worse the smoothness of the die hole, the greater the friction resistance between the ...
2024-12-09 20:41:25
|
|
...sliding between the tower wheel and the copper-clad steel wire, and the more serious the wear on the surface of the tower wheel. This non...
2024-12-09 20:41:25
|
|
... with the continuous increase of the tensile half angle. Relationship between die hole shape and stretching: In the conical die hole, the ...
2024-12-09 20:41:25
|
|
...type Series) and straight line (i.e. conical Series). From the point of view of uniform deformation of wire rod in the stay die, it seems that the ...
2024-12-09 20:41:25
|
|
... commonly used wire mold materials include diamond mold, cemented carbide mold, polycrystalline mold, etc. A. Diamond mold: Diamond mold, also ...
2024-12-09 20:41:25
|