131 - 140 of 228
diamond wires drawing dies
Selling leads
|
...Wire Drawing Machine For Different Wire Sizes Introduction Strictly follow the equipment maintenance regulations Do a good job in the daily ...
2024-12-09 20:41:25
|
|
...Wire IM Drawing Machine Introduction There is no definite time for the service life cycle of the annealed nickel strip of the copper wire drawing ...
2024-12-09 20:41:25
|
|
...; The lower coil is powered by the lower coil and the lower coil diameter is adjustable; AC variable frequency speed regulation, the wire drawing ...
2024-12-09 20:50:59
|
|
...: HRC70 ° The micro pulling tower wheel is mirror polished, and the surface finish is up to Suitable for stretching Φ 0.02-0.05 stainless steel ...
2024-12-09 20:41:25
|
|
...Wire Drawing Machine , Inlet 0.6-1.2MM Wire Manufacturing Machine Introduction Quality Control 1. Carefully check the copper rod before getting on ...
2024-12-09 20:41:25
|
|
...Wire Drawing Machine For 0.08 To 0.32 Mm Copper Aluminum Wire Introduction The utility model discloses an improved device for making a small ...
2024-12-09 20:41:25
|
|
...Wire Drawing Machine With 630mm Single Spool Take Up Main Features ♦ Famous brands are used: Schneider switches & circuit breakers, SKF bearings, ...
2024-12-09 20:41:25
|
|
24D Bare Copper Wire Drawing Machine With Pneumatic Brake Introduction The utility model discloses a small high-speed copper wire drawing machine, ...
2024-12-09 20:41:25
|
|
Cone Type Fine Wire Drawing Machine For Bare Copper Introduction A small high-speed copper wire drawing machine comprises a frame (1), an inlet (2), ...
2024-12-09 20:41:25
|
|
Flat Belt Drive Spray Type Fine Wire Drawing Machine Introduction The take-up equipment of the small copper wire drawing machine comprises a machine ...
2024-12-09 20:41:25
|