171 - 180 of 215
8d rbd wire drawing machine
Selling leads
|
Second Hand Copper Wire Manufacturing Machine , 24 Block Cable Making Equipment Introduction Solution to surface oxidation of single wire pulled out ...
2024-12-09 20:41:25
|
|
... of pulling copper wire is greater than that of pulling aluminum wire, and the aluminum wire is easy to break, so a larger safety factor should be ...
2024-12-09 20:41:25
|
|
...Wire Drawing Machine Introduction Through the research on the material of the wire drawing die, the wire drawing die is developing towards high ...
2024-12-09 20:41:25
|
|
... hole when the cross section changes and the periodic pressure caused by the vibration of the metal wire in the stretching process, resulting in ...
2024-12-09 20:41:25
|
|
High Speed Intermediate Wire Drawing Machine 0.4 Mm To 1.2 Mm Introduction The production line is highly integrated by uncoiling, leveling, forming, ...
2024-12-09 20:41:25
|
|
... the die hole under the action of a certain tension to make the plastic deformation of the wire rod, reduce the section and increase the length. It ...
2024-12-09 20:41:25
|
|
Double Wire Intermediate Drawing Machine , Low Cost Wire Drawing Equipment Introduction The production line is highly integrated by uncoiling, ...
2024-12-09 20:41:25
|
|
... frequency technique to achieve above grade 6 precision to the GB standard (IEC), resulting in high operating accuracy and low noise. ♦ Processing: ...
2024-12-09 20:41:25
|
|
..., the tension axis of the wire rod shall be symmetrical with the center line of the die hole through debugging, so as to make the stress of the ...
2024-12-09 20:41:25
|
|
...Wire Pulling Machine Introduction Control mode 1. To realize the speed control of wire drawing and wire take-up, the speed signal must be measured ...
2024-12-09 20:41:25
|