31 - 39 of 39
0 4mpa copper rod drawing machine
Selling leads
|
... the die hole under the action of a certain tension to make the plastic deformation of the wire rod, reduce the section and increase the length. It ...
2024-12-09 20:41:25
|
|
...the same, the tensile force of pulling copper wire is greater than that of pulling aluminum wire, and the aluminum wire is easy to break, so a ...
2024-12-09 20:41:25
|
|
Antiwear Wet Wire Drawing Machine , Copper Wire RBD Machine Technical Parameters Item DL-400/9C Input wire 8.0 mm Output wire 2.25 - 3.0 mm Max die ...
2024-12-09 20:41:25
|
|
Reliable Supplier Intermediate RBD Wire Drawing Machine For CCA Wire Introduction Wire drawing oil annealing is to heat the cold deformed metal to ...
2024-12-09 20:41:25
|
|
Integrated Casting Water Tank R.B.D Wire Drawing Machine For Copper Aluminum Introduction 1. The power supply of the machine is three-phase five wire ...
2024-12-09 20:41:25
|
|
Horizontal DC Annealing Equipment For Copper Wire RBD Machine Introduction Annealing device (1) Type: horizontal DC annealing (2) Diameter of ...
2024-12-09 20:41:25
|
|
...Copper Wire Continuous Annealing Machine Introduction After drawing, the internal particles of copper wire are broken, the character is distorted, ...
2024-12-09 20:41:25
|
|
0.141 Mm Artificial Diamond Die For Wire Drawing Machine Introduction Die hole structure Entrance area: Generally, there is a circular arc, which is ...
2024-12-09 20:41:25
|
|
... the friction between die hole diameter and wire rod. The worse the smoothness of the die hole, the greater the friction resistance between the ...
2024-12-09 20:41:25
|