Acrylic Based Adhesive Backing Matte Car Vinyl Wrap Dark Green Metallic Effect

 Product Name:  Air Release Swipeable Matte Metallic Dark Green Car Wrap Film

 Product Description:

• Car wrap film is a process of transforming the color and looks of your car by applying large sheets of pressure-sensitive vinyl film to each individual panel on the car. Carbon fiber vinyl wrap film is applied with extreme precision and skill and can only be carried out by highly trained and specialized staff.
• The acrylic-based adhesive backing features Air Release and Heat Fuse technologies to support the DIY'ers and the professional look of the completed quality. Never worry about bubbles or creases when wrapping!
  Sticks to any clean, smooth surface with no mess and no added products necessary.

Product Specfications:

Product Features:

• Faster positioning and air bubble-free car wrapping film application
• Excellent conformability around curves and recesses
• Exceptional durability and performance
• Available in opaque and textured, special effect, and metallic options
• Combines a colored film and protective layer in one convenient construction with fewer seams

Advantages of Applying Car Wrap Film:

• Vinyl car wraps wear as well as, or better than paint – when properly cared for. Think of it like a skin for your laptop or a silicon cover for your phone. The vinyl can take a beating protecting the vehicle’s paint underneath.
• Adds to the resell value of your car. When you remove it, your paint is in the same condition as on the day it was wrapped. Thus adding to the resale value by having flawless paint on your car. A repainted car normally decreases the value of your vehicle due to concerns over possible previous accident(s).
• You can restore the car to its original color by removing the wrap.
• Hides scratch, small chips, and “freshens” the look of your vehicle.
• Matte-paint jobs can be brittle and chip easily, while vinyl is more durable and harder to scratch. In the event that repairs are needed, the part that was damaged can be easily replaced, providing a perfect match.
• You don’t have to wrap your entire car; you can just do your hood, roof, mirrors, stripes, etc.
• Many of the styles can not be reproduced by paint.
• Expensive, color-matching paint fees are unnecessary for scratches or accident vehicles; just re-wrap the section that needs repair.

Product Application:

￭ Trailers

￭ Trucks

￭ Emergency Vehicles

FAQs:

• How long does vinyl wrap last?

Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care for installation, and environmental factors, car wraps can last from three to ten years.

• How to remove vinyl from your car?

1.Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

3.Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.

4.Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

• Can I put my wrapped car through a car wash?

Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.