11 - 20 of 231
vehicles flammability test apparatus
Selling leads
|
... equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, ...
2025-07-25 00:17:41
|
|
... 26.4 table 14, IEC60309-1: 2012 clause 24.4 figure 9, etc. Equipment Structure It is used to process the mechanical load flexing test of the ...
2025-07-25 00:17:41
|
|
...Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: ...
2025-07-25 00:17:41
|
|
...Vehicle Label Marking Abrasion Test Apparatus Complied Standards & Clauses IEC 62196-1: 2020 Ed.4CDV clause 8.7, figure 8. Equipment Overview This ...
2025-07-25 00:17:41
|
|
... 18. Equipment Overview During temperature rise test, immediately following temperature stabilization, the accessories are subjected to external ...
2025-07-25 00:17:41
|
|
... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy ...
2025-07-25 00:17:41
|
|
...Vehicle Withdrawal Force And Latching Verification Test Apparatus Complied Standards & Clauses IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14...
2025-07-25 00:17:41
|
|
... clause 23.3, etc. Equipment Overview This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors ...
2025-07-25 00:17:41
|
|
...Test Apparatus Complied Standards & Clauses It is designed and manufactured according to IEC 61851-1:2017 clause 11.6. Equipment Overview Samples ...
2025-07-25 00:17:41
|
|
...vehicle charging station Cable Anchorage Pull Force and Torque Test Apparatus Complied Standards & Clauses It is designed and manufactured ...
2025-07-25 00:17:41
|