171 - 180 of 365
ev connector testing equipment
Selling leads
|
Large Dust Chamber for Electric Vehicle Spare Parts System Overview The large dust chamber is suitable for sealing parts and enclosure’s sand and dust ...
2025-07-29 00:13:05
|
|
IEC 61851 Electric Vehicle Charging Station Waterproof Test Room Complied Standards & Clauses IEC/CDV 61851-2-2:1999 AC charging stations for electric ...
2025-07-29 00:13:05
|
|
Rapid Temperature Change Thermal Shock Testing Three-zone Chamber Complied Standards & Clauses The 3-Zones Thermal Shock Test Chamber is required by ...
2025-07-29 00:13:05
|
|
... Overview The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over ...
2025-07-29 00:13:05
|
|
EV Charging Connector Rolling Test Machine EV Charging Port Mechanical Strength Test Complied Standards & Clauses Conforms to IEC62196-1:2022 ...
2025-07-29 00:13:05
|
|
... Overview It is used to check the withdrawal force required when the test plug is withdrawn from the socket-outlet and latching device. Technical ...
2025-07-29 00:13:05
|
|
...IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. Equipment Overview It is used to verify whether electrical ...
2025-07-29 00:13:05
|
|
...requirements of IEC62196-1: 2022 clause 26.4 table 14, IEC60309-1: 2012 clause 24.4 figure 9, etc. Equipment Structure It is used to process the ...
2025-07-29 00:13:05
|
|
... clause 23.3, etc. Equipment Overview This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors ...
2025-07-29 00:13:04
|
|
...Test Equipment Complied Standards & Clauses IEC62196-1:2014 "Plug,socket-outlets,vehicle couplers and vehicle inlets–Conductive charging of ...
2025-07-29 00:13:05
|