China Electric Vehicle Testing Equipment manufacturer
Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
4
Home > Products > Walk In Environmental Test Chamber >

Large Walk-in Environmental Test Chamber Walk-in Climate Test Chamber

Browse Categories

Sinuo Testing Equipment Co. , Limited

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:+86-020-39185976

Contact Person:
Ms.Zoe Zou
View Contact Details

Large Walk-in Environmental Test Chamber Walk-in Climate Test Chamber

Brand Name Sinuo
Model Number SN886-3.38m³
Certification Calibration Certificate (Cost Additional)
Place of Origin China
Minimum Order Quantity 1
Payment Terms T/T
Supply Ability 10 Sets Per Month
Delivery Time 30 Days
Packaging Details Export packing
Temperature range -40~+100℃
Effective volume 3.38m³
Humidity range 20%〜98%RH
Humidity fluctuation ±3.0%RH
Cooling rate Average 1℃/min
Heating rate About 3℃/min
Inner box dimensions 1300 mm*1300 mm*2000mm(W*D*H)
External dimensions Approx. 1600 mm*1900 mm*2450 mm(W*D*H)
Detailed Product Description


 

Large Walk-in Environmental Test Chamber Walk-in Climate Test Chamber

 

Complied Standards & Clauses


 

Applied Standard:

IEC60068-2-1:2007 Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT

IEC60068-2-2:2007 Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT

IEC60068-2-78:2001 Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT

IEC60068-2-22:2005 Environmental Testing Part 2-22: Tests Test N: Change of temperature, IDT


Product Overview


 

This equipment is suitable for high and low temperature tests on electrical, electronic, mechanical and large parts, semi-finished products, finished products, etc. It can simulate high and low temperature changes to test the quality and reliability of products and parts.

 

Sample Restrictions:

  1. Testing and storage of samples of volatile substances;
  2. Testing and storage of samples of corrosive substances;
  3. Testing or storage of biological samples;
  4. Testing and storage of samples of strong electromagnetic radiation sources.

 

Technical Parameters


 

Workshop dimensionsWidth 1300mm × Depth 1300mm × Height 2000mm
Outer dimensionsChamber body is approx. Width 1600mm × Depth 1900mm × Height 2450mm (excluding motor protrusion height) Subject to actual size
Door

1) Double-door hinged door, door opening size 2 meters wide × 2 meters high, two silicone rubber seals and anti-frost electric heating device on the door frame;

2) Door sealing: high and low temperature resistant high-quality sealing strips are used, with good sealing;

3) Condensation elimination: electric heating is pre-buried around the door to prevent condensation at low temperatures;

4) Safety protection: The door can be opened from the inside and outside, the inner box has a safety hammer escape device, and the safety equipment is running an emergency stop switch (with a protective cover) to ensure the personal safety of the operator.

Observation windowTwo hollow glass observation windows, one on each side of the test chamber door, size: 400×600mm (width×height)
Test lead hole

Wiring holes: 2 100mm, 1 on each side of the door opening.

The host is on the right, the cabinet is on the left.

There is one more wiring hole on the right side of the cabinet.

LightingThe top of the studio is equipped with a high and low temperature explosion-proof lamp to facilitate observation of the sample test status
Structural strengthTest box bottom plate load-bearing capacity: ≧100KG (uniform load)
Warehouse board inner wall materialSUS304 stainless steel, thickness 1.0mm
Warehouse board outer wall materialColored steel plate
Insulation materialHard polyurethane foam material, thickness 100mm
Warehouse base, electric control box and freezerUsing national standard angle iron + 6# channel steel + steel plate spraying
Pressure balance portThere is a pressure balance port on the top of the working room: when the pressure in the box is too high, it will be automatically discharged. Rapidly reduce the pressure in the cabin, equipped with a safety shield.
RampEquipped with 2 meters long X500MM wide stainless steel patterned plate, bearing 200KG
 

Details


 

 

 

 

Product Tags: Large Walk In Climate Test Chamber   Climate Walk In Environmental Test Chamber   Large Walk In Environmental Test Chamber  
Related Products
Email to this supplier
 
From:
Enter your Email please.
To: Sinuo Testing Equipment Co. , Limited
Subject:
Message:
Characters Remaining: (80/3000)