3.38m³ Walk-in Climate Test Chamber For Temperature And Humidity Testing

3.38m³ Walk-in Climate Test Chamber for Temperature and Humidity Testing

Complied Standards & Clauses

Applied Standard:

IEC60068-2-1:2007 Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT

IEC60068-2-2:2007 Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT

IEC60068-2-78:2001 Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT

IEC60068-2-22:2005 Environmental Testing Part 2-22: Tests Test N: Change of temperature, IDT

Product Overview

Take your product testing to the next level with the SN886 Walk-in Temperature and Humidity Test Chamber, engineered for large-scale reliability and extreme environmental simulation. With a generous 3.38m³ interior, this walk-in chamber is the ideal solution for testing oversized or multiple samples under precisely controlled climate conditions.

Equipment use conditions

1. Voltage: three-phase 380V±10%; 50±10Hz; three-phase four-wire + ground wire;
2. Ambient temperature: <30℃;
3. Ambient humidity: < 85%R.H (25℃);
4. Atmospheric pressure: 86～106Kpa;
5. Environmental conditions: no strong vibration around the equipment site, no strong electromagnetic field interference, no high concentration of dust and corrosive substances, no direct sunlight or other heat sources.
6. The equipment should be placed horizontally in a well-ventilated test room, and sufficient space should be left around for operation and maintenance.
7. Water tower: (15 refrigeration tons, 12 cubic meters/H)
8. Power: 32KW 80A

Technical Parameters