IEC 60068 Temperature Humidity Walk In Environmental Test Chambers

IEC 60068 Temperature Humidity Walk In Environmental Test Chambers

Complied Standards & Clauses

IEC 60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”

IEC 60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”

IEC 60068-2-14:1984 "Basic environmental testing procedures-Part 2: Tests-Test N: Change of temperature, IDT"

IEC 60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle) , IDT”

IEC 60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”

IEC 60068-3-1:1974, "Basic environmental testing procedures-Part 3: Background information -Section 1: Cold and dry heat tests"

IEC 60068-3-1A:1978, First supplement to publication 60068-3-1, IDT) and etc.

Equipment Overview

It is used to make the test of high and low temperature, damp and heat tests on electrical, electronic, mechanical and large parts, semi-finished products, and finished products. To test the quality and productivity of products, spare parts under simulated temperature and humidity conditions.

Installation environment:

Temperature: 0℃～35℃, relative humidity: ≤85%, air pressure: 86kPA～106kPa.

Please confirm that the installation site should be level, well ventilated, and without strong vibration around the equipment. There has no strong electromagnetic filed, without flammable, explosive, corrosive substances and dust around this equipment. It should leave enough space for use and maintenance.

Technical Parameters