Electro-hydraulic synchro. CNC Press Brake sheet bending machine servo main motor

Electro-hydraulic synchronization CNC Press Brake sheet bending machine servo main motor

Principe and Features of the machine:

●  The frame is made of steel sheet welded structure, left and right houses, working table and cylinder base are welded into a whole frame. After welding, the internal stress is eliminated by tempering, so the whole steel is strong and the stability is good.

●  High-frequency hydraulic control technology, faster, more efficient and accurate.

●  Back gauge of CNC Press Brake is brought standard 2 fingers back gauge system, as to complex shapes work pieces, 4 or 5 fingers back gauge system and corresponding dies are available for your choose.

●  According to input sheet metal datas on Press brake, CNC system can automatically calculate and adjust the table deflection compensation yielding uniform length of all work-pieces angles.

● The distance and height of the rear stopper and the stroke of Ram are controlled by CNC system, which is convenient and quick.

● Oil cylinder has been machined with entire flowings to get the best condition, as forged, Quenched and tempered, and fine grinding, and then hard chromium plating and other processes.  finally assembely the import of sealing ring, the phenomenon of oil leakage in customer service.

● The hydraulic system adopts the integrated hydraulic system of oil road to reduce the installation of the pipeline.

● The use of mechanical deflection compensation gives access to uniform full length workpieces. which can make the table occurs relative movement and form an ideal convex curve, ensuring the relative positions with slider keep unchanged. 

Basic Configuration:

Introduction of Main Parts:

--Holland Delem DA-58T System Features:

   DA-58T features:      

2D graphical touch screen programming

15" high resolution colour TFT

• Bend sequence calculation
• Crowning control
• Servo and frequency inverter control
• Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
• USB, peripheral interfacing
• Profile-T offline software

 -- Germany Rexroth hydraulic system: 

 -- Germany EMB Joints

   Exquisite shape

   Fine tightness

   Large flowing

   low pressure loss

   No oil leakage.  

-- Germany BAUSER and Busak+Shamban Seals

Strong anti-extrusion ability to gap

Seals will not be twisted or fliped

Good wear resistance and easy assembly  

Good leakproof 

-- GIVI Sensor Ruler

The CNC Press brake use fully closed-loop electro-hydraulic servo control,

Ram position signals can be feedback to CNC system by two sides Sensor Ruler, 

then CNC controller DA58T adjusts the oil flowing amount by changing the opening size of synchronous valve

, hereby controlling the ram Y1, Y2 running on the same level, maintaining the parallel state of the worktable.

-- Mechanical Crowning table

•  The local deflection compensation mechanism uses a mechanical interference table compensation structure. CNC controller automatic calculation control.
•  Each group consists of several groups of three-dimensional curved surfaces with different slopes. The compensation curve is closer to the deformation curve of the slide plate, which greatly improves the machining accuracy of the bending machine.

-- Backgauge

  ● X axis drived by servo motor via ball screw

  ● R axis drived by servo motor via ball screw

  ● Taiwan HIWIN Ball Screw and Liner Guide

  ● all Servo Motors

  ● Manual adjusting the position of fingers

  -- Fast Clamping to fix Top tool easily

--One Set of Standard Top tool and Double V-Die (Amada style)

Material: 42CrMo or customized

Overall quenching process, high hardness and good wear resistance.

Double V-die  V8,V12,V16 (customized)

  -- Reliable electrical system

• Electrical system is France Schneider
• Equipped with dustproof cabinet to guarantee the high quality electrical system
• Open the door and power off, high quality servo motor driver.