Optical Online TSS Meter Aquaculture Sewage Treatment RS485 Support Modbus
|
|
OpticalOnline TSS sensor probe for aquaculture sewage treatment can monitor RS485 support modbus Product description The sensor adopts 135 ° back light principle, 880nm infrared LED
light source and Desun uniwill's unique adaptive software
algorithm, which can effectively remove the interference of external light. Optical fibre structure for good repeatables and good stability.
Supported by an automatic cleaning brush. Bubbles can be eliminated, reducing the effect of contamination on measurements. Maintenance intervals are longer and good stability is maintained even with long-term in-line use. 0.5~4000 mg/L Accuracy < 3% 0~50 °C; IP68 protection, water depth within 10 meters. 135 ° back light principle. Built-in temperature sensor Support RS-485 , MODBUS protocol Convenient, fast, stable and easy to maintain Technical parameter
Frequently Asked Questions
Cable information 4 wire AWG-24 or AWG-26 shielding wire. Turbidity=5mm 1, red line - power supply (VCC) 2, white line - 485 data _B (485_B) 3, green line --- 485 data _A (485_A) 4, black line --- ground (GND) 5, bare line---- shielding layer Maintenance methods Sensor maintenance 1) Sensor outer surface: Clean the outer surface of the sensor with
tap water. If there isstill debris left, wipe it with a soft, damp
cloth. For some stubborn dirt, some household washing liquid can be added to the tap waterfor cleaning. 2) Check the cable of the sensor: The cable should not be tightened during normaloperation, otherwise the internal wires of the cable may be broken and the sensor may not work properly. 3) Check if the sensor's measurement window is dirty . 4) Check the sensor housing for damage.
Notice: The probe contains sensitive optical and electronic components. Make sure the probe is not subject to severe mechanical shock. No need inside the probe The part to be maintained by the user. Install Before installation, please check the appearance of the cables for
damage, and disperse the cables. 1. When using the throw-in sensor, avoid the sensor hitting the
wall or other facilities caused by water flow. If the water flow rate is too fast, the
sensor must be fixed. 2. There should be no obstructions in front of the measurement. For
example, fluorescence sensors should be avoided from light. Quality assurance Our company assures its first-hand buyers that there will not be any product defects caused by substandard materials or factory manufacturing in the 3 months after shipment. If a defect is found within the 3-month warranty period, Desun Uniwilli Electronics promises to repair or replace the defective product or return the payment in addition to the first shipping and related formalities. Any product repaired or replaced during the warranty period will only enjoy the remaining warranty period of the original product. This warranty does not apply to consumables such as consumable parts (including but not limited to lamps, pipes, etc.). Contact Desun Uniwill Electronics or your agent to begin technical support during the warranty period. After receiving the customer's questions about product quality, our company will confirm whether the product needs to be repaired within two weeks; products that have not been approved for repair cannot be returned.
limit This warranty does not cover the following: ● Damage caused by force majeure, natural disasters, social unrest, war (published or unpublished), terrorism, civil war, or any government coercion ● Damage caused by improper use, negligence, accident or improper application and installation ● Freight charges for shipping the goods back to Desun Uniwill ● Expedited or express shipping for parts or products covered by the warranty ● Travel expenses for local warranty repairs
This warranty covers all aspects of our company's warranty regarding its products. This warranty constitutes the final, complete and exclusive statement of the terms of the warranty, and no one or agent is authorized to formulate other warranties in the name of Disen Hezhi Electronics. Company InformationXi'an Desun Uniwill Electronic Technology Co., Ltd (Hereinafter referred to as Disen Sensing Company) is located in Xi'an High-tech Development Zone. It is a high-tech company integrating production, R&D, sales and engineering services. Relying on Xi'an's rich high-tech resources, we have carried out technical cooperation with many universities and scientific research institutions, constantly breaking through technical barriers, improving product performance, and using leading technology to provide high-quality products for the water quality monitoring industry. We launched a wireless water quality monitoring solution based on the current rapid development of the Internet of Things technology, combining smart terminals and traditional display units through wireless transmission to achieve real-time dynamic water quality monitoring functions such as data cloud display, remote cloud control, and upper and lower limit alarms. Services* Workshop and process standardization |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: Optical Online TSS Meter Aquaculture Sewage Treatment Online TSS Meter online tss analyzer Support Modbus | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Optical Fibre TSS Suspended Solids Sensor Real Time Self Cleaning POM |
|
Optical Online TSS Meter Aquaculture Sewage Treatment RS485 Support Modbus |
|
Wastewater Outlet Suspended Solids Sensor RS485 Online Tss Meter IP68 |
|
IP68 RS485 Online Suspended Solids Monitor For Wastewater Plants |
|
Circulation Type Suspended Solids Sensor 5V Online TSS Analyzer Realtime |
|
Aquaculture Total Suspended Solids Sensor RS485 Modbus Protocol |