331 - 340 of 464
pdc drilling drag bit
Selling leads
|
...Drilling Hammer High Pressure 6" DTH Hammer Description High-pressure Down-The-Hole (DTH) hammer is a specialized tool used in drilling operations, ...
2025-05-12 23:34:18
|
|
... efficiency, low failure rate and long service life. Even for all kinds of high hardness, high abrasive rocks and other harsh conditions, our ...
2025-05-12 23:34:13
|
|
...Drill Bit 200mm IADC 437 for water well 1.Description: -The 437 TCI bits are used to drill low compressive strength, very soft formations. This ...
2025-08-28 03:52:41
|
|
...medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds. -The drill bit should go down the well according ...
2025-08-28 03:52:41
|
|
..., such as mudstone, gypsum, salt, soft shale, soft limestone,etc. -The cutting structure of Glorytek tricone bits has been in continuous use in the ...
2025-08-28 03:52:41
|
|
...bit API Standard 14 3 / 4'' IADC 127 Steel Tooth Tricone Drill Bit 1.Description: ▹High temperature heat treatment forged alloy steel. ...
2025-08-28 03:52:45
|
|
... various formations, including medium to hard rock formations. They are often chosen when drilling conditions do not require the increased ...
2025-08-28 03:52:39
|
|
... various formations, including soft sediments, medium-hard rocks, and extremely hard formations. With its three cone-shaped components, the Tricone ...
2025-08-28 03:52:32
|
|
TCI Teeth Elastomer sealed bearing tricone rock bit The Photo of products 1.Description: The roller bit is a widely used drilling bit. When the roller ...
2026-03-17 07:30:20
|
|
TCI Teeth Tricone Rock Bit 1. Description: The roller bit is a widely used drilling bit. When the roller bit is working, the cutting teeth contact the ...
2026-07-07 00:26:12
|