101 - 110 of 138
worm gearbox 15mm stepper motor
Selling leads
|
... output shaft with a pitch of 0.5mm of the screw, through the screw and the screw rod supporting the turn of the screw into a thrust. Motor basic ...
2025-08-02 00:14:36
|
|
... 4-phase stepper motor with a gearbox on top. Motor voltage 5~12Vdc optional, The motor is cheap and reliable, and is very commonly used in air ...
2024-12-09 17:14:42
|
|
... changed according to requirements, and it can also be equipped with corresponding output devices such as gears, pulleys, worms, screw rods, etc. ...
2025-08-02 00:14:37
|
|
...Stepper Motor Dia10 Mini Geared Stepper Motor With Lead Screw For Medical Equipment VSM10-816G is the use of diameter 10MM micro stepper motor and ...
2025-08-02 00:14:37
|
|
..., the reduction ratio can be customized according to customer needs. Motor basic step angle is 18 degrees, that is, 20 steps per turn, plus the ...
2024-12-09 17:14:42
|
|
...Stepper Motor Dia10 Mini Geared Stepper Motor With Lead Screw For Medical Equipment VSM10-816G is the use of diameter 10MM micro stepper motor and ...
2024-12-09 17:29:43
|
|
... that provides a wide range of gear reduction ratios from 1:10 to 1:1000. It is designed to operate in a wide temperature range from -0 to +55 ℃, ...
2025-08-02 00:14:37
|
|
...=20 steps to rotate one turn. This 20mm permanent magnet stepper motor has 18 degree step angle. This motor has high reliability and low price, ...
2025-08-02 00:14:37
|
|
.... The step angle of a single motor is 3.75°/step. It has a top gear ratio of 42.5, so the step angle is 3.75°/42.5. This motor is suitable for 12V ...
2025-08-02 00:14:37
|
|
... on top. The red cable is common line in the middle. This motor has cheap price and high reliability, the motor is very commonly used on air ...
2025-08-02 00:14:37
|