301 - 310 of 1106
air testing infrared sensor
Selling leads
|
...-only devices and amplified signal conditioned devices. The microbridge mass airflow sensor operates on the theory of heat transfer. Mass airflow ...
2025-04-29 14:36:04
|
|
...Sensor For Environmental Air Quality Monitoring Product Introduction: VOC - B4 is an electrochemical gas sensor. It can detect VOC gases and CO ...
2025-08-25 12:44:25
|
|
...Sensor Body Sensor Probe Features: NAP-55A is a small and low power sensor. The NAP-55A is intended for gas detection and leak testing. Compared ...
2025-04-09 19:33:49
|
|
...sensor has a high level of repeatability, with a 1%F.S rating. This means that measurements taken by the sensor have a low level of variance, ...
2025-04-08 17:55:31
|
|
...: ±1% of full scale (FS) Signal output: 14 - 30 µA (90% response time at 10,000 ppm O₂); 295 - 625 µA (in air) Sensitivity: 1.4 - 3...
2025-08-30 04:44:30
|
|
.... The design optimizes the sensor sensitivity, accuracy and long-term stability and enables the sensor to detect O3 variations at parts per billion ...
2025-09-19 00:16:19
|
|
...ultra-high resolutions. The design optimizes the sensor sensitivity, accuracy and long-term stability and enables the sensor to detect SO2 ...
2025-09-19 00:16:19
|
|
...0 SLPM); Interface type: Manifold. operation The principle of microbridge gas mass flow sensor is heat transfer. The mass flow rate of gas is ...
2025-04-29 14:36:05
|
|
...Sensor Ambient Air Quality Monitoring System Ambient Air Quality Monitoring System With High Resolution Carbon Monoxide Sensor 50CO-B4F Features: ...
2025-06-21 10:51:27
|
|
... The power supply required for the sensor is between 3.0~3.6VDC, with a maximum current draw of 10mA. In addition to its accurate measurements and ...
2025-04-08 17:55:30
|