211 - 219 of 219 Selling leads
|
1. Process condition The following booths are included: 1) Primer booth 2) Top coat booth 2. Design Specification 2-1. Booth enclosure The booth ...
2024-12-09 18:10:44
|
|
Control of Main Electric Equipment 1.1. Pretreatment When the electric system for pretreatment is in the control state of "local automation"...
2024-12-09 18:10:44
|
|
1. Design Description 1-1. Air supply units The air supply unit consists of a galvanized steel sheet housing, which accommodates 2 layer filters,, air ...
2024-12-09 18:10:44
|
|
Paint-spraying Equipment In the drying-type painting room, a drying-type painting separation system is set below the grating plate. Its working ...
2024-12-09 18:10:44
|
|
1. Production condition The following working areas included: 1)Pre-cleaning ,ED sanding 2) Sealing (Interior & Exterior) 3) Under body sealing & ...
2024-12-09 18:10:44
|
|
Workstation Equipment According to the structural types, the work station equipment can be divided into open-type and closed-type. The open-type ...
2024-12-09 18:10:44
|
|
PT ED Equipment PT ED equipment includes tank, housing, platform, oil-removing device, rust-removing device, silane or phosphorization slag-removing ...
2024-12-09 18:10:44
|
|
Baking & Cooling Equipment In automatic control system, the typical control mode of “central monitoring, decentralized control” is adopted. The ...
2024-12-09 18:10:44
|
|
TOOLING AND FIXTURE TOOLING, FIXTURE AND MINO INTELLIGENT DESIGN PLATFORM PRODUCT INTRODUCTION Tooling and Fixture/ Tooling, Fixture and MINO ...
2024-12-09 18:10:44
|