241 - 250 of 336
pc multi cavity injection mold
Selling leads
|
... is polished to SPI B-2, and the cavity and core are hardened using 1*4/S136, providing better smoothness, higher hardness, corrosion resistance, ...
2026-06-28 00:05:20
|
|
...-plates mold is a widely used injection mold design due to its simplicity and cost-effectiveness. It is suitable for a wide range of plastic ...
2026-06-28 00:05:20
|
|
...mold with an innovative hot runner system! This mold design, consisting of a cavity plate and a core plate, is favored for its simplicity and cost...
2026-06-28 00:05:20
|
|
... side, both mounted on separate mold plates. In this mold, the cold runner system prevents material from remaining molten between cycles, which can ...
2026-06-28 00:05:20
|
|
... gate 【Part material】: PC 【Part weight】: 8.7g 【Part size】: 55.6X6.23X103.98mm 【IMM Tonnage】: 110T 【Surface finish】: A surface EDM with VDI27# 【Part ...
2026-06-28 00:05:20
|
|
...mold Mold size: 400.00 X 660.00 X 546.00mm Custom mold base FCI4050-A130-B115-C95 Net weight: 505KG+505KG Harden cavity & core with S136 Part ...
2024-12-09 21:52:05
|
|
...cavity and core with S136 and surface EDM with VDI27# to improve the anti-wearing and anti-corrosion performance, so that the surface is smooth ...
2024-12-09 21:52:05
|
|
...mold Gate Tool life Pin point gate 500k shots Surface finish has high precision, smooth w/o pits. Partial surfaces EDM with VDI18# (Makino); harden ...
2026-06-28 00:05:20
|
|
... 3.92 Part weight Width 20.7 0.1g Height 11.42 Considering the cost-effective performance, the two-plates mold has simple design to reduce the R & ...
2026-06-28 00:05:20
|
|
... gate Tool life 500k shots Three-plates mold structure, harden cavity+core (1*1/S136) with hardened surface, hardness > 600HV Part material PC+ABS ...
2026-06-28 00:05:20
|