341 - 350 of 450
lkm precision injection molding
Selling leads
|
... mold Part material PPS+30%GF Part weight 19.5g Part size 63.56*110.62*20.88mm Injection/runner type Hot runner Surface finish A surface polished ...
2024-12-09 21:52:05
|
|
...Mold base Standard (FCI2530.609080) 175kg ★ Fit 80T machine The mold is designed with a tab gate, the pin point gate turns to the side gate; more ...
2024-12-09 21:52:05
|
|
... turns to the side gate This is a three-plates mold, which requires no post-processing and can realize auto demolding Mold weight 166kg Tool life ...
2026-06-18 00:29:33
|
|
... (hardness up to 48-54HRC, with high hardness, anti-wearing and anti-corrosion performance and good machinability, low maintenance cost) Injection ...
2024-12-09 21:52:05
|
|
...plates mold with pin point gate, self-degating, high injection pressure; fit 110T machine; 2 lifters in each cavity, can mold 8 parts simultaneousl...
2024-12-09 21:52:05
|
|
...mold was developed by Chitwing (designed and manufactured). It is designed with a side gate and a custom mold base; the pin point gate turns to the ...
2026-06-18 00:29:33
|
|
...Mold net weight IMM Tonnage Two-plates mold LKM 500k shots 47kg BOY10T Length 150 Width 220 Height 177 Gate Part material Injection type Runner ...
2024-12-09 21:52:05
|
|
...LKM Type: three-plates mold Mold net weight: 350 kg Mold size: 350 X 400 X 416mm Part net weight: 3.5g Part size: 41.3 * 56.24 * 10.6mm IMM tonnage...
2024-12-09 21:52:05
|
|
...Guangdong, China Type Three-plates mold Injection/runner type Cold runner Part material PC+20GF The mold is designed with a sub gate (the pin point ...
2024-12-09 21:52:05
|
|
...21774 The mold is designed with LKM standard, hot runner turns to cold runner, saving materials, stable molding, shorter cycle time Mold base ...
2026-06-18 00:29:33
|