1 - 10 of 450
lkm injection plastic molding
Selling leads
|
... part production. Featuring a two-plate design that separates to release molded pieces. The cold runner system is carefully planned to minimize ...
2026-06-18 00:29:33
|
|
VR knob control shaft (1*4) No.22732-B This mold is designed for producing VR eyeglasses knob control shafts. It features a cold runner system and has ...
2026-06-18 00:29:33
|
|
...e undergone EDM (Electrical Discharge Machining) using VDI27# (Makino) and LKM standard. The mold has a size of 400mm in length, 450mm in width, ...
2026-06-18 00:29:33
|
|
..., and self-degating with minimized gate mark) Type: Two-plates mold (side gate mold) Standard: General plastic mold standard LKM in China IMM ...
2026-06-18 00:29:33
|
|
...mold was developed (designed and manufactured) by Chitwing with LKM high quality mold base; mold surface polished to 600# sandpaper, so that the ...
2026-06-18 00:29:33
|
|
...) [Lifter]: 4 [Tool life]: ≥ 500K shots [Type]: Two-plates mold (machine clamping force can be accurately tuned) [Part material]: PPS + 30%GF [Part ...
2024-12-09 21:52:05
|
|
...mold part is made using an LKM mold base and is designed with a cold runner system. The surface of the mold has an etch of MT11010, and some areas ...
2026-06-18 00:29:33
|
|
...weight of 277kg. The mold uses a sub gate, which is flexible in position and self-degating to minimize gate marks. It is a two-plates mold, ...
2026-06-18 00:29:33
|
|
...Mold base P/N FCI3035 609080 Mold size Length*Width Height 350*350 331 Standard: LKM Type: Three-plates mold Gate: Pin point gate √ Standard: LKM √ ...
2026-06-18 00:29:33
|
|
... LKM Width 660 2k mold Type Three-plates mold Height 545 Standard: LKM Injection/runner type: Hot runner Gate: pin point gate (hot runner turns to ...
2024-12-09 21:52:05
|