21 - 30 of 450
cold runner injection molding
Selling leads
|
... is 19.37 * 22.00 * 7.94mm, and the part weight is only 0.5g. Gate Slide Pin point gate 1 According to the part material POM, the mold is designed ...
2026-06-18 00:29:33
|
|
...Case Shaft (1*2) No.23847 This mold was developed (designed and manufactured) by Chitwing with two slides, cold runner and short cycle time; the ...
2026-06-18 00:29:33
|
|
... with MT11010 etching, while the cavity and core are hardened using 1*2/S136 steel, ensuring durability and longevity. Adhering to the esteemed LKM ...
2026-06-18 00:29:33
|
|
...mold is a three-plates mold with a size of 280mm (L) x 270mm (W) x 296mm (H). It is built on a standard mold base FCI2327 608080 from LKM. The mold ...
2026-06-18 00:29:33
|
|
.... Designed for an injection molding machine with a tonnage of 180T, it follows the LKM standard. The mold has a tool life of 500K shots and ...
2026-06-18 00:29:33
|
|
...Mold weight - 392kg ☆ IMM Tonnage - 180T ☆ Gate - Side gate ☆ Part material - PC ☆ Part size - 21.41 X 50.40 X 25.18mm ☆ Part net weight - 1.6g ☆ ...
2026-06-18 00:29:33
|
|
... base P/N: FCI2327 608080 and follows the LKM standard. The mold has a net weight of 132 kg and is suitable for an injection molding machine with a ...
2024-12-09 22:52:57
|
|
...mold is a three-plates mold with a size of 350mm (L) x 450mm (W) x 446mm (H). It has a net weight of 425kg and is built on a DAI3045 70120100 mold ...
2026-06-18 00:29:33
|
|
... the LKM standard. The mold base weighs 392kg and is suitable for an injection molding machine with a tonnage of 180T. The mold features a side ...
2026-06-18 00:29:33
|
|
..., and self-degating with minimized gate mark) Type: Two-plates mold (side gate mold) Standard: General plastic mold standard LKM in China IMM ...
2026-06-18 00:29:33
|