211 - 220 of 450
cold runner injection molding
Selling leads
|
...94 kg. The injection part is made of PP+40% GF material and uses a cold runner system. The surface finish is polished to SPI B-2 standard. The ...
2026-06-18 00:29:33
|
|
...251mm. It has a weight of 102 kg and requires a 100T injection molding machine (IMM) tonnage. The gate used is a cashew gate, which is suitable for ...
2026-06-18 00:29:33
|
|
...mold using LKM mold base. Our mold is a two-plates mold with a high-precision cold runner and cashew gate design. It is meticulously crafted to ...
2024-12-09 22:44:19
|
|
.... The mold base used is a standard mold base with a pin point gate. With a tool life of up to 500,000 shots, this three-plate mold incorporates a ...
2026-06-18 00:29:33
|
|
...China, is a three-plates mold with a mold standard of LKM. It has a net weight of 1158kg and is designed to be used with an injection molding ...
2026-06-18 00:29:33
|
|
...mold base:P/N: CI25 30.50.80.80 The mold measures 300mm in length, 300mm in width, and 271mm in height. It features an SPI-A2 surface finish, a ...
2026-06-18 00:29:33
|
|
...mold base CI2545.609080, mold size 300x450x356mm, LKM standard, cashew gate, and two-plates mold with simple structure, low cost and easy to fill. ...
2026-06-18 00:29:33
|
|
... and easy to fill. The mold has a net weight of 310 kg and the injection molding machine (IMM) has a tonnage of 130 metric tons. Selected surfaces ...
2026-06-18 00:29:33
|
|
...mold part is made using an LKM mold base and is designed with a cold runner system. The surface of the mold has an etch of MT11010, and some areas ...
2026-06-18 00:29:33
|
|
... design. Each component is meticulously designed to ensure a smooth molding operation with minimal noise. The mold is finished with a blue-surface ...
2024-12-09 23:34:49
|