101 - 110 of 450
cold runner injection molding
Selling leads
|
... side, both mounted on separate mold plates. In this mold, the cold runner system prevents material from remaining molten between cycles, which can ...
2026-06-18 00:29:33
|
|
...Cold Runner Three Plate Mold is a type of injection mold used in the manufacturing of plastic parts. It consists of three main plates: the cavity ...
2026-06-18 00:29:33
|
|
... life 500k shots Surface finish A surface EDM to VDI27# Standard LKM Steel of cavity and core Harden (1*1/S136) Mold features: 1 slide, no ...
2026-06-18 00:29:33
|
|
... side, both affixed to separate mold plates. In this mold, the cold runner system allows the material to solidify between cycles, which can lead to ...
2026-06-18 00:29:33
|
|
... three primary plates: the cavity plate, the core plate, and the runner plate. The cavity plate and core plate define the actual shape of the part ...
2026-06-18 00:29:33
|
|
...Mold base P/N FCI3035 609080 Mold size Length*Width Height 350*350 331 Standard: LKM Type: Three-plates mold Gate: Pin point gate √ Standard: LKM √ ...
2026-06-18 00:29:33
|
|
...mold has a reasonable structure to ensure uniform pressure and minimized stress concentration. The tool life is up to 5-10 years (50 K shots). It ...
2026-06-18 00:29:33
|
|
... is polished. The cavity and core are hardened to have good physical strength and anti-wearing performance. It adopts three-plates mold structure ...
2026-06-18 00:29:33
|
|
...mold is designed with standard mold base (FCI3545.70120120) Origin Guangdong, China Standard LKM Size 400.000 X 450.000 X 421.000mm Length 400 Net ...
2026-06-18 00:29:33
|
|
...Mold base:Standard CI2025.507070. 2. Standard:LKM 3. Type:Two-plates mold 4. Tool life:500K shots ⒌IMM tonnage:100T 6. Mold size:(L)250 X (W)250 X ...
2026-06-18 00:29:33
|