71 - 80 of 309
cold runner custom pvc molding
Selling leads
|
...Standard]: LKM [Slide]: 4 [IMM tonnage]: 180T Injection/Runner Type Type Gate Tool life Cold runner (lower cost, easier to maintain) Two-plates ...
2026-06-28 00:05:21
|
|
... runner ☆ Features: 2 slides and 1 lifter ☆ Tool life: 500k shots ☆ Part material: PC+ABS ☆ Part size: 148.89 x31.87x5....
2026-06-28 00:05:21
|
|
... type Three-plates mold Cold runner Part Material: PC+ABS Gate: Side gate Surface finish 1. TPU surface EDM with Makino VDI21# 2. Other surfaces ...
2026-06-28 00:05:21
|
|
... cavity plate which forms the actual shape of the part being produced, the core plate, and the runner plate which is used to create the channels ...
2026-06-28 00:05:20
|
|
... is 19.37 * 22.00 * 7.94mm, and the part weight is only 0.5g. Gate Slide Pin point gate 1 According to the part material POM, the mold is designed ...
2026-06-28 00:05:21
|
|
.... The cold runner system is a technique used in injection molding where the material for the part is kept at a lower temperature than the rest of ...
2026-06-28 00:05:20
|
|
..., and self-degating with minimized gate mark) Type: Two-plates mold (side gate mold) Standard: General plastic mold standard LKM in China IMM ...
2026-06-28 00:05:20
|
|
...Case Shaft (1*2) No.23847 This mold was developed (designed and manufactured) by Chitwing with two slides, cold runner and short cycle time; the ...
2026-06-28 00:05:21
|
|
... with MT11010 etching, while the cavity and core are hardened using 1*2/S136 steel, ensuring durability and longevity. Adhering to the esteemed LKM ...
2026-06-28 00:05:20
|
|
...lifters Type Three-plates mold IMM Tonnage 140T Tool life 500k shots Gate Sub gate Surface finish A surface VDI24 etch Steel of cavity and core ...
2026-06-28 00:05:20
|