181 - 190 of 309
cold runner custom pvc molding
Selling leads
|
...Mold Size Net weight Custom mold base P/N: DAI4560 Length 550 856kg Width 600 Height 551 The mold with cashew gate (hot runner turns to cold runner...
2026-06-28 00:05:20
|
|
...runner injection molding technology. This advanced method uses a heated runner system to deliver molten plastic resin into the mold cavities, ...
2026-06-28 00:05:21
|
|
...4) No.23309 & 23310 Mold size Mold base P/N 270 X 465 X 356 FCI2735 6011080 Gate Standard Pin point gate + submarine gate LKM Mold life Type 500k ...
2026-06-28 00:05:20
|
|
...mold was developed (designed and manufactured) by Chitwing with LKM high quality mold base; mold surface polished to 600# sandpaper, so that the ...
2026-06-28 00:05:20
|
|
...mold base P/N: GCI2025.608070. Length 250 Width 250 Height 266 Mold net weight 98kg Part net weight 0.16g Standard LKM Type Two-plates mold Cavity ...
2024-12-09 21:52:05
|
|
...mold with impressive dimensions, measuring Length: 550mm, Width: 650mm, and Height: 551mm. This mold showcases a Cashew gate, adhering to the ...
2026-06-28 00:05:20
|
|
...manufacturing), using standard mold base, LKM standard; the molded part has smooth surface and aesthetic appearance w/o burrs; with mature ...
2024-12-09 21:52:05
|
|
.../Runner Type: Cold runner Gate: side gate Type: Two-plates mold Part size: 5.99 X2.7 X27.25mm Surface finish Steel of cavity Steel of core Partial ...
2024-12-09 21:52:05
|
|
... (4) Standard: LKM Gate Type Part material Tool life Side gate Three-plates mold PC+ABS/TPU 500k shots The mold was developed and produced by ...
2026-06-28 00:05:21
|
|
...-54HRC, with high hardness, anti-wearing and anti-corrosion performance and good machinability, low maintenance cost) Injection type Runner type ...
2024-12-09 21:52:05
|