261 - 270 of 340
cold runner 3 plate mold
Selling leads
|
... particular mold is a three-plates mold, meticulously designed to ensure optimal performance and productivity. It incorporates a pin point gate for ...
2026-06-28 00:05:20
|
|
... Type Two-plates mold Part material PPS+30%GF Part weight 19.5g Part size 63.56*110.62*20.88mm Injection/runner type Hot runner Surface finish A ...
2024-12-09 21:52:05
|
|
...Mold size/net weight: (L) 400x (W) 500x (H) 527mm /708 kg Mold base P/N: FCI3550 7010070 [Standard] - LKM Part material: PC Molding size 30.91 X 47...
2026-06-28 00:05:21
|
|
...wearing performance and higher hardness. This is a three-plates mold with polished surface and pin point gate. Tool life 500k shots Part material ...
2026-06-28 00:05:20
|
|
...weight PC+ABS 97.57 X 201.20 X 67.77mm 100g The mold is designed by Chitwing to meet customers' cost-effective requirements: ☆ Cold runner system ...
2026-06-28 00:05:20
|
|
... structure (1*1) No.25174 Mold details [L*W] 350mm*450mm Standard [H] 476mm LKM ① Three-plates mold ② Pin point gate ③ Surface with YS20020 etch ④ ...
2024-12-09 21:52:05
|
|
...net weight of 94 kg. This is a two-plate mold with a side gate. The part material is made of PC. It features a cold runner injection system. The ...
2026-06-28 00:05:20
|
|
...-plates mold has a size of 250 X 200 X 231mm and features a sub side gate for injection. The mold is designed for a tool life of 500k shots and is ...
2026-06-28 00:05:20
|
|
...166kg and a tool life of 500,000 shots. This three-plate mold features a cold runner system and a side gate design, replacing the previous pin ...
2026-06-28 00:05:20
|
|
... Part weight 240g Type: Two-plates mold Standard: LKM IMM tonnage: 450T The mold is developed (designed and manufactured) by Chitwing with advanced ...
2026-06-28 00:05:20
|