221 - 230 of 319
abs multi cavity injection mold
Selling leads
|
...cavity and core with S136 and surface EDM with VDI27# to improve the anti-wearing and anti-corrosion performance, so that the surface is smooth ...
2024-12-09 21:52:05
|
|
...mold base P/N: GCI2025.608070. Length 250 Width 250 Height 266 Mold net weight 98kg Part net weight 0.16g Standard LKM Type Two-plates mold Cavity ...
2024-12-09 21:52:05
|
|
...Mold base :P/N: FCI3540 6010090 ★ Mold size L: 400 W: 400 H: 360.4 ★ Mold weight 366.5kg ★ IMM Tonnage 110T ★ Gate - This is a pin point gate, with ...
2026-06-28 00:05:20
|
|
...Mold Cold Runner is a type of injection mold. It consists of two main parts, the cavity side and the core side, which are mounted on separate mold ...
2026-06-28 00:05:20
|
|
Top cover bracket (1*1) No.25175 LKM standard Mold details L 350mm H 436mm Type Three-plates mold Cold runner Lifter W 400mm Net weight 384.3KG Gate ...
2024-12-09 21:52:05
|
|
... is polished to SPI B-2, and the cavity and core are hardened using 1*4/S136, providing better smoothness, higher hardness, corrosion resistance, ...
2026-06-28 00:05:20
|
|
...-plates mold is a widely used injection mold design due to its simplicity and cost-effectiveness. It is suitable for a wide range of plastic ...
2026-06-28 00:05:20
|
|
...mold with an innovative hot runner system! This mold design, consisting of a cavity plate and a core plate, is favored for its simplicity and cost...
2026-06-28 00:05:20
|
|
... side, both mounted on separate mold plates. In this mold, the cold runner system prevents material from remaining molten between cycles, which can ...
2026-06-28 00:05:20
|
|
...mold base P/N: CI25 30.50.80.80 IMM tonnage: 100T The mold measures 300mm in length, 300mm in width, and 271mm in height. It features side gate ...
2026-06-28 00:05:20
|