301 - 310 of 450
80t abs injection molding
Selling leads
|
...Mold size Standard L W LKM 320mm 300mm H Type 311mm Two-plates mold Part material PC+ABS Part size ￠42x11mm Part weight 5g Tool life up to 500k ...
2024-12-09 21:52:05
|
|
... are hardened using 1*4/S136, providing better smoothness, higher hardness, corrosion resistance, and wear resistance. This prevents POM from ...
2026-07-06 00:12:28
|
|
...-plates mold is a widely used injection mold design due to its simplicity and cost-effectiveness. It is suitable for a wide range of plastic ...
2026-07-06 00:12:28
|
|
...mold with an innovative hot runner system! This mold design, consisting of a cavity plate and a core plate, is favored for its simplicity and cost...
2026-07-06 00:12:28
|
|
...mold with a cold runner system. This mold design consists of two main parts that are separated along a parting line. The cold runner system is a ...
2026-07-06 00:12:28
|
|
.... The cold runner system is a technique used in injection molding where the material for the part is kept at a lower temperature than the rest of ...
2026-07-06 00:12:28
|
|
... side, both mounted on separate mold plates. In this mold, the cold runner system prevents material from remaining molten between cycles, which can ...
2026-07-06 00:12:28
|
|
... Standard mold base P/N: CI25 30.50.80.80 IMM tonnage: 100T The mold measures 300mm in length, 300mm in width, and 271mm in height. It features ...
2026-07-06 00:12:28
|
|
... parts within a single molding cycle. This precision engineering ensures uniform part quality and consistency across all cavities, maximizing ...
2026-07-06 00:12:29
|
|
...Injection Molds are engineered with precision to ensure consistent part quality and uniformity across all cavities. This design maximizes ...
2026-07-06 00:12:29
|