141 - 150 of 450
80t abs injection molding
Selling leads
|
... mold base adhering to the LKM standard, with a net weight of 385kg. The gate used is a direct gate, which offers small pressure loss and allows ...
2026-07-06 00:12:28
|
|
...] [H326mm]. It features a pin point gate and is designed for injection with PC material. The surface finish is polished to SPI B-2 standard. The ...
2026-07-06 00:12:28
|
|
... and versatility. With a compact size of 350350331mm and a net weight of 254kg, it is suitable for a wide range of applications. The mold features ...
2026-07-06 00:12:28
|
|
...mold No.23306 &23307-B Transparent Headphone Lower Housing (1*2) No.23306 & 23307-B The mold, with the part number DAI2740 808090, is a three...
2026-07-06 00:12:29
|
|
...94 kg. The injection part is made of PP+40% GF material and uses a cold runner system. The surface finish is polished to SPI B-2 standard. The ...
2026-07-06 00:12:28
|
|
...mold base part number is CI2530 609080 and it is made according to LKM standard. The mold has a tool life of 500K shots and uses a submarine gate ...
2026-07-06 00:12:28
|
|
...mold base P/N]: CI2025.507070 [Standard]: LKM [Net weight]: 94 kg [Type]: Two-plates mold [Gate]: side gate [Part material]: PP+40% GF [Injection...
2026-07-06 00:12:28
|
|
...plates mold Features: Assisted Ejection Injection/Runner Type: Cold Runner This is a two-plates mold developed (designed and manufactured) by ...
2026-07-06 00:12:28
|
|
... loss, easier to fill the mold quickly) [Injection/runner type]: Hot runner (no cold slug, saving material cost) [Surface finish]: ☆ Other surfaces ...
2026-07-06 00:12:28
|
|
...]: cashew gate [Injection/Runner Type]: Cold Runner [IMM tonnage]: 100T Surface finish ① Partial surfaces polished to SPI B-2 ② Partial surfaces .....
2026-07-06 00:12:28
|