61 - 70 of 213
500k shots single cavity mold
Selling leads
|
... (1*4) No.21059 1. Mold base:Standard CI2025.507070. 2. Standard:LKM 3. Type:Two-plates mold 4. Tool life:500K shots ⒌IMM tonnage:100T 6. Mold size...
2026-06-28 00:05:20
|
|
... runner turns to cold runner) Tool life: 500k shots Type: Two-plates mold Features: 6 lifters Part material The mold fits 130T machine; the part ...
2026-06-28 00:05:21
|
|
...Mold weight 172.76KG LKM ★ Tool life > 500k shots ★ IMM tonnage: 90T ★ Pin point gate ★ Three-plates mold The mold is made of high quality steel ...
2024-12-09 21:52:05
|
|
... and anti-corrosion performance, so that it can be used or stored in complicated environment without special protection; tool life > 500k shots; ...
2024-12-09 21:52:05
|
|
...cavity and core with S136 and surface EDM with VDI27# to improve the anti-wearing and anti-corrosion performance, so that the surface is smooth ...
2024-12-09 21:52:05
|
|
...500k shots The mold net weight is 93kg, and fit 80T machine; the part size is (L)9.6*(W)8.6*(H)5.2mm and the part weight is 0.2g Mold size: 250 X ...
2024-12-09 21:52:05
|
|
...mold base Cavity angled slide Mold Size Length 550 Fit 100T machine Width 600 Height 551 Net weight 856kg Gate Cashew gate (the hot runner turns to ...
2024-12-09 21:52:05
|
|
... (4) Standard: LKM Gate Type Part material Tool life Side gate Three-plates mold PC+ABS/TPU 500k shots The mold was developed and produced by ...
2026-06-28 00:05:21
|
|
...side gate * 6 [Type] [Lifter] * Three-plates mold structure * 10 [Injection/runner type] * Cold runner [Surface finish] ◇ Make the mold obtain a ...
2026-06-28 00:05:20
|
|
... Type Two-plates mold Part material PPS+30%GF Part weight 19.5g Part size 63.56*110.62*20.88mm Injection/runner type Hot runner Surface finish A ...
2024-12-09 21:52:05
|