1 - 10 of 362
400mm two plate mold
Selling leads
|
.... Additionally, the mold features slide and 8 lifters, and uses a side gate (the pin point gate turns to the side gate). This is a two-plate mold, ...
2026-07-06 00:12:28
|
|
... design, allowing for the separation of the mold to release the molded parts. The cold runner system is meticulously designed to minimize gate ...
2026-07-06 00:12:28
|
|
...China, is a three-plates mold with a mold standard of LKM. It has a net weight of 1158kg and is designed to be used with an injection molding ...
2026-07-06 00:12:28
|
|
...mold is built on a standard GCI3540.90120100 mold base and follows the LKM mold standard. It has a length of 400mm, a width of 400mm, and a height ...
2026-07-06 00:12:28
|
|
...Plate Mold is a type of injection mold used in the manufacturing of plastic parts. It consists of three main plates: the cavity plate, the core ...
2026-07-06 00:12:28
|
|
...-plates mold is a widely used injection mold design due to its simplicity and cost-effectiveness. It is suitable for a wide range of plastic ...
2026-07-06 00:12:28
|
|
... three primary plates: the cavity plate, the core plate, and the runner plate. The cavity plate and core plate define the actual shape of the part ...
2026-07-06 00:12:28
|
|
...plates mold with an innovative hot runner system! This mold design, consisting of a cavity plate and a core plate, is favored for its simplicity ...
2026-07-06 00:12:28
|
|
... Phone Back Cover (1*1) No.21872 Mold base P/N FCI3035 609080 Mold size Length*Width Height 350*350 331 Standard: LKM Type: Three-plates mold Gate: ...
2026-07-06 00:12:28
|
|
...mold base P/N: FCI3527.110100105 Gate: tab gate (the pin point gate turns to the side gate) Mold size/net weight IMM tonnage 110T 320 X 350 X 426mm...
2024-12-09 21:52:05
|