161 - 170 of 302
180t single cavity mold
Selling leads
|
... X 16.99 X 37.70mm [Injection/runner type]: Hot runner [Surface finish]: A surface VDI24 etch. [Steel of cavity & core]: 1+1/S136 harden.
2026-06-28 00:05:20
|
|
...mold base P/N FCI2530.609080 LKM standard The mold is designed with cold runner, pin point gate, and three-plates structure, and is tailor-made for ...
2026-06-28 00:05:20
|
|
...mold base P/N: CI3545.60110100 [Mold size] L400xW450xH331mm [Standard] LKM [Mold net weight] 370kg [Injection/runner type] Cold runner [Type] Two...
2026-06-28 00:05:21
|
|
...mold base P/N: CI4040.7010090. Length 450 Width 400 Height 331 Net weight IMM Tonnage 360kg 140T Type: Two-plates mold Gate: Direct gate Standard: ...
2026-06-28 00:05:21
|
|
...mold Gate Tool life Pin point gate 500k shots Surface finish has high precision, smooth w/o pits. Partial surfaces EDM with VDI18# (Makino); harden ...
2026-06-28 00:05:20
|
|
...mold was developed by Chitwing (designed and manufactured). It is designed with a side gate and a custom mold base; the pin point gate turns to the ...
2026-06-28 00:05:20
|
|
...Mold net weight IMM Tonnage Two-plates mold LKM 500k shots 47kg BOY10T Length 150 Width 220 Height 177 Gate Part material Injection type Runner ...
2024-12-09 21:52:05
|
|
...# Mold base Standard Part material Type Three-plates mold PC Injection/runner type Steel of cavity and core Cold runner Harden (1*2/S136) The mold ...
2024-12-09 21:52:05
|
|
...mold Injection/runner type Cold runner Part material PC+20GF The mold is designed with a sub gate (the pin point gate turns to the side gate), ...
2024-12-09 21:52:05
|
|
...Cold runner Type: three-plates mold Part material: PC The large surface EDM with Charmilles VDI24#, and harden the cavity and core with 1*2/S136, ...
2024-12-09 21:52:05
|