351 - 356 of 356
110t injection mold cold runner
Selling leads
|
... shots, this mold is meticulously crafted with a surface polished to 600# sandpaper. It employs a cold runner system and is constructed on an LKM ...
2026-06-28 00:05:20
|
|
... (Electrical Discharge Machining) using VDI27# (Makino) and LKM standard. With dimensions of 400mm in length, 450mm in width, and 429mm in height, ...
2026-06-28 00:05:20
|
|
...Mold dimensions: 110x330x125mm Standard: LKM Mold Type: Two-plate mold Number of slides: 2 Net weight of the mold: 27.54kg IMM Tonnage: 60T The two...
2026-06-28 00:05:20
|
|
...mold section is produced with an LKM mold base and is structured with a cold runner system. It is etched with MT11010 on the surface, and specific ...
2026-06-28 00:05:20
|
|
... & core hardened with 1*8/S136. The part material/weight is PA/0.03g, with a part size of 6.21 X 5.61 X 2.91mm. The IMM Tonnage is 60T. The two...
2026-06-28 00:05:20
|
|
...Mold size Slide Lifter Cold runner LKM L: 760mm W: 660mm H: 750mm 4 4 Steel of cavity and core Harden with S136 Surface finish Polish to 800# ...
2024-12-09 21:52:05
|