- ARUBA 300 SERIES WIRELESS ACCESS POINTS
- AP type: Indoor, dual radio, 802.11n/ac 2x2:2/3x3:3 MU-MIMO Dual Radio
- The compact Aruba 303 Series AP delivers a maximumAP-300 SERIES SPECIFICATIONS
• AP-305 (controller-managed) and IAP-305 (Instant): --5GHz 802.11ac 3x3 MIMO (1,300 Mbps max rate) and 2.4GHz 802.11n 2x2 MIMO (300 Mbps max rate) radios, with a total of three integrated omni-directional downtilt dual- band antennas. WI-FI RADIO SPECIFICATIONS • AP type: Indoor, dual radio, 5GHz 802.11ac 3x3 MIMO and 2.4GHz 802.11n 2x2 MIMO • Software-configurable dual radio supports 5GHz (Radio 0) and 2.4GHz (Radio 1) • 5GHz: Three spatial stream Single User (SU) MIMO for up to 1,300 Mbps wireless data rate to individual 3x3 VHT80 client devices • 5GHz: Two spatial stream Multi User (MU) MIMO for up to 867 Mbps wireless data rate to up to two (1x1 VHT80) MU-MIMO capable client devices simultaneously • 2.4GHz: Two spatial stream Single User (SU) MIMO for up to 300 Mbps wireless data rate to individual 2x2 HT40 client devices • Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio • Supported frequency bands (country-specific restrictions apply): --2.400 to 2.4835GHz --5.150 to 5.250GHz --5.250 to 5.350GHz --5.470 to 5.725GHz --5.725 to 5.850GHz • Available channels: Dependent on configured regulatory domain • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum • Supported radio technologies: --802.11b: Direct-sequence spread-spectrum (DSSS) --802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) • Supported modulation types: --802.11b: BPSK, QPSK, CCK --802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM • Transmit power: Configurable in increments of 0.5 dBm • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): --2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2) --5GHz band: +18 dBm per chain, +23 dBm aggregate (3x3) --Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks • Maximum ratio combining (MRC) for improved receiver performance • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance • Short guard interval for 20MHz, 40MHz and 80MHz channels • Space-time block coding (STBC) for increased range and improved reception • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput • Transmit beam-forming (TxBF) for increased signal reliability and range • Supported data rates (Mbps): --802.11b: 1, 2, 5.5, 11 --802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 --802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15) --802.11n (5GHz): 6.5 to 450 (MCS0 to MCS23) --802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3 for VHT20/40/80 • 802.11n high-throughput (HT) support: HT 20/40 • 802.11ac very high throughput (VHT) support: VHT 20/40/80 • 802.11n/ac packet aggregation: A-MPDU, A-MSDU WI-FI ANTENNAS • AP-304/IAP-304: Three RP-SMA connectors for external dual band antennas. Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 0.8dB in 2.4GHz and 1.6dB in 5GHz. • AP-305/IAP-305: Three integrated dual-band downtilt omni-directional antennas for 3x3 MIMO with peak antenna gain of 3.9dBi in 2.4GHz and 5.4dBi in 5GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees. --Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 2.4dBi in 2.4GHz and 2.8dBi in 5GHz. OTHER INTERFACES • One 10/100/1000BASE-T Ethernet network interface (RJ-45) --Auto-sensing link speed and MDI/MDX --802.3az Energy Efficient Ethernet (EEE) • USB 2.0 host interface (Type A connector) • Bluetooth Low Energy (BLE) radio --Up to 3dBm transmit power (class 2) and -92dBm receive sensitivity --Integrated antenna with roughly 30 degrees downtilt and peak gain of 2.3dBi (AP-304/IAP-304) or 3.4dBi (AP-305/IAP-305) • Visual indicators (multi-color LEDs): for System and Radio status • Reset button: factory reset (during device power up) • Serial console interface (proprietary; optional adapter cable available) • Kensington security slot POWER SOURCES AND CONSUMPTION • The AP supports direct DC power and Power over Ethernet (PoE) • When both power sources are available, DC power takes priority over PoE • Power sources are sold separately • Direct DC source: 12Vdc nominal, +/- 5% --Interface accepts 2.1/5.5-mm center-positive circular plug with 9.5-mm length • Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af/802.3at compliant source --Unrestricted functionality with 802.3at PoE --When using IPM, the AP may enter power-save mode with reduced functionality when powered by an 802.3af PoE source (see details on Intelligent Power Monitoring elsewhere in this datasheet) --Without IPM, the USB port is disabled when the AP is powered by an 802.3af PoE source • Maximum (worst-case) power consumption: 13W (PoE) or 12W (DC) --Excludes power consumed by external USB device (and internal overhead); this could add up to 6.5W (PoE) or 5.5W (DC) for a 5W/1A USB device • Maximum (worst-case) power consumption in idle mode: 3.7W (PoE) or 2.6W (DC). RF PERFORMANCE TABLE | | Maximum transmit power (dBm) per transmit chain | Receiver sensitivity (dBm) per receive chain | 2.4 GHz | 802.11b 2.4 GHz | 1Mbps | 18.0 | -95.0 | 11Mbps | 18.0 | -88.0 | 802.11g 2.4 GHz | 6Mbps | 18.0 | -92.0 | 54Mbps | 18.0 | -74.0 | 802.11n HT20 2.4 GHz | MCS0/8 | 18.0 | -91.0 | MCS/7/15 | 18.0 | -71.0 | 802.11n HT40 2.4 GHz | MCS0/8 | 18.0 | -88.0 | MCS7/15 | 18.0 | -68.0 | 802.11a 5GHz | 6Mbps | 18.0 | -92.0 | 54Mbps | 18.0 | -74.0 | 802.11n HT20 5GHz | MCS0/8/16 | 18.0 | -91.0 | MCS7/15/23 | 18.0 | -71.0 | 802.11n HT40 5GHz | MCS0/8/16 | 18.0 | -88.0 | MCS7/15/23 | 17.0 | -68.0 | 802.11AC VHT20 5GHz | MCS0 | 18.0 | -91.0 | MCS8 | 18.0 | -67.0 | 802.11AC VHT40 5GHz | MCS0 | 18.0 | -88.0 | MCS9 | 17.0 | -63.0 | 802.11AC VHT80 5GHz | MCS0 | 18.0 | -85.0 | MCS9 | 17.0 | -58.0 |
FAQ Q1.What can you buy from us? A:Mellanox, Aruba, Rukus, Extreme brand
products, including switches, network cards, cables, Access Point,
etc. Q2.How about the delivery date? A:It usually takes 3-5 working days. For
specific models, please contact us to check the stock. In the end,
the actual
consultation shall prevail. We will do our best to deliver as
soon as possible. Q3.What's your warranty terms? A: We supply 12 months warranty time. Q4.How about the Shipping Method? A: We use Fedex/DHL/UPS/TNT and other air
shipments,sea shipments are also workable. In one words, we could
do any shipments that you wanted. Q5.Can I get some samples? A:Yes, sample order is available for quality
check and market test. You only need to pay the sample cost and
express cost. Q6.What are your core strengths? A:First-hand supply, Original and new products
with the favorable price and perfect after-sales service.
|