Leather Testing Equipment Vertical Low-Temperature Testing Machine
Corresponding Standard :ASTM-D1790 HZ-3011BEquipment Overview HZ-3011B Vertical low-temperature testing machine is a machine
which adopt vertical design, do not have to bend over to grip
specimen, easy to operate, thus more handy, it used to test the
finished shoes, rubber, plastics, shoe soles, synthetic leather and
other material in a cryogenic or cool regions environment. The
machine is made of stainless steel, and can install various fixture
to suit different requirements.
Standard
operative standard :ASTM-D1790,D1593,JIS-K6545
Applicable Industry
Applied to test leather performance in shoes, clothing, luggage
handbag industry, research laboratories; commodity inspection,
arbitration and technical supervision departments
Technical Parameters | Model | HZ-3011B | | Standard | ASTM-D1790,D1593,JIS-K6545 |
| Inside size D×W×H | 400×500×400mm(L*W*H) | | fixture | Based on actual demand, such as sole folding, leather folding and
shoes folding | | index | Temperature range | Normal temperature ～ -30℃ | | uniformity | ≤±0.5℃/.+2℃-3℃ | | Cooling time | -25℃～-30℃(about 80min) | | system | controller | LED digital(from Taiwan) P,I,D +S,S,R.microcomputer controller | | Accurate range | Setting accuracy:temperature ±0.1℃,directed accuracy:temperature
±0.1℃,resolution :±0.1℃ | | Cooling system | Totally enclosed air-cooled single-stage compression refrigerate
mode / original from French "Taikang" / totally enclosed air-cooled
re-compression refrigerate mode | | Compressor start delay | 5min | | Circular system | Temperature, low-noise, air-conditioning-type motor. Multi-vane
centrifugal wind wheel | | material | Outside material | High-quality carbon steel plate. Phosphide electrostatic spray
treatment / SUS304 stainless steel hairline treatment | | Inside material | SUS304 High-quality stainless steel light board | | Insulation material | Rigid polyurethane foam, ultra-fine glass fiber cotton | | Standard collocation | a set of Multi-heated glass window attached lighting, testing
product shelf 2 pcs, test leads holes (25,50 mm) 1 pcs | | Safe protection | Leak current, short circuit, over temperature, motor overheating,
over-pressure compressor, overload, over-current protection | | timing | 0.1～999.9(S,M,H)adjustable | | Power | 2.5KW | | Voltage | AC380V±10％ 50±0.5Hz Three-phase five-wire system | | environmental temperature | 5℃～＋30℃ ≤85％R.H | annotation:
1. Above data were measured at temperature (QT) 25 ℃ and no-load
condition.
2. Can be customized non-standard-type high-low-temperature testing
machine according to use’s requirements |
|
