451 - 460 of 686
smd uart interface ic
Selling leads
|
MAX 3000A Programmable Logic Device Family Features ■ High–performance, low–cost CMOS EEPROM–based programmable logic devices (PLDs) built on a MAX® ...
2026-01-05 15:51:23
|
|
DEVELOPMENT TOOL SUPPORT All MSP430 microcontrollers include an Embedded Emulation Module (EEM) allowing advanced debugging and programming through ...
2026-01-05 15:51:23
|
|
Introduction of MKL16Z32VLH4 Performance • 48 MHz ARM® Cortex®-M0+ core Memories and memory interfaces • Up to 128 KB program flash memory • Up to 16 ...
2026-01-05 15:51:23
|
|
USB Peripheral/Host Controller with SPI Interface General Description The MAX3421E USB peripheral/host controller contains the digital logic and ...
2026-01-05 15:51:23
|
|
MCP3204/3208 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface Features • 12-bit resolution • ± 1 LSB max DNL • ± 1 LSB max INL ...
2026-01-05 15:51:23
|
|
L9637D ISO 9141 INTERFACE OPERATING POWER SUPPLY VOLTAGE RANGE 4.5V ≤ VS ≤ 36V (40V FOR TRANSIENTS) REVERSE SUPPLY (BATTERY) PROTECTED DOWN TO VS ≥ ...
2026-01-05 15:51:23
|
|
AT91 ARM Thumb-based Microcontrollers AT91SAM9G45 Features • 400 MHz ARM926EJ-S™ ARM® Thumb® Processor – 32 KBytes Data Cache, 32 KBytes Instruction ...
2026-01-05 15:51:23
|
|
MCP2510 Stand-Alone CAN Controller with SPI™ Interface FEATURES • Implements Full CAN V2.0A and V2.0B at 1 Mb/s - 0 - 8 byte message leCM GROUPh - ...
2026-01-05 15:51:23
|
|
Features • Available in the Texas Instruments NanoFree™ Package • 1.65-V to 5.5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 0.8 ns ...
2026-01-05 15:51:23
|
|
... interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low...
2026-01-05 15:51:23
|