121 - 130 of 131
8 soic driver receiver
Selling leads
... kV Using Human-Body Model (HBM) Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards Three Drivers and Five Receivers ...
2024-12-09 22:37:47
|
... 1/8th Unit-Load (up to 256 nodes on the bus) Bus-Pin ESD Protection Exceeds 16-kV HBM Driver Output Voltage Slew-Rate Limited for Optimum Signal ...
2024-12-09 22:37:47
|
... Logic Supply of 1.6V to 5.5V Wide Input Dynamic Range of –15dBm to +5dBm for Receiver Power Delivered by the Driver to the Coax can be Adjusted ...
2024-12-09 22:37:47
|
... < 1 mA High Receiver Hysteresis for Noise Immunity (60 mV Typical) 1/8 Unit-Load (Up to 256 Nodes on the Bus) Bus-pin ESD Protection Exceeds 15 kV ...
2024-12-09 22:37:47
|
...TIA/EIA-232-F and ITU v.28 Standards Operates With 3-V to 5.5-V VCC Supply Operates Up to 250 kbps Two Drivers and Two Receivers Low Standby ...
2024-12-09 22:37:47
|
... kV Using Human-Body Model (HBM) Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards Three Drivers and Five Receivers ...
2024-12-09 22:37:47
|
... of TIA/EIA-232-F and ITU V.28 Standards Operates With 3-V to 5.5-V VCC Supply Operates up to 250 kbps One Driver and One Receiver Low Standby ...
2024-12-09 22:37:47
|
... operate from +5V and +12V, respectively, and contain a +12V to -12V charge-pump voltage converter. The MAX200–MAX209/MAX211/MAX213 drivers and ...
2024-12-09 22:37:59
|
... feature one driver and one receiver. The MAX13487E/ MAX13488E include a hot-swap capability to eliminate false transitions on the bus during power...
2024-12-09 22:37:59
|
TOSHIBA PHOTOCOUPLER GaAℓAs IRED & PHOTO-IC TLP105 Isolated bus drivers High-speed line receivers Microprocessor system interfaces The Toshiba TLP105 ...
2024-12-09 22:37:59
|